Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 288-pin DDR4 DIMM with black chips and silver heat spreader

A-Tech

A-Tech 16GB DDR4 2933 ECC RDIMM 1Rx4 server RAM

SKU CH-DHTA-S9BRB

16GB DDR4 2933 ECC registered DIMM with CL21 latency and 1.2V operation for server upgrades

  • Capacity16GB
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16 GB capacity expands server memory for heavier workloads
  • DDR4 2933 MHz speed accelerates data throughput for demanding applications
  • ECC registered design detects and corrects errors to protect critical data
  • 2 V operation reduces power draw and heat in dense configurations
  • 288-pin RDIMM form factor fits compatible HP server platforms

16GB DDR4 2933 ECC RDIMM for HP servers

This 16GB DDR4 2933 ECC RDIMM module is built for HP server and workstation platforms that require registered memory with error correction. The single-rank 1Rx4 design operates at PC4-23400 speed with CL21 latency and standard 1.20V voltage. It targets administrators who need to expand capacity in compatible HP systems using major-brand chipsets.

Replaces ten HP part numbers directly

The module serves as a compatible equivalent for HP part numbers P19041-B21, P00920-K21, P00920-B21, P03051-191, P14633-001, P19041-H21, P19254-001, P14117-B21, P03051-091, and P00920-H21. Using this replacement lets you add 16GB of registered ECC memory without sourcing the original HP-branded modules. No extra software or accessories are included in the package.

288-pin DIMM installs in standard DDR4 slots

Installation follows normal DDR4 DIMM procedure: align the notch, press firmly until the latches click, and verify seating. Registered ECC modules must match the platform's memory mode and population rules; mismatched ranks or mixing unbuffered DIMMs will prevent boot. Always confirm the system's qualified vendor list and maximum supported capacity before adding this module.

Kohokohdat

  • 16 GB capacity expands server memory for heavier workloads
  • DDR4 2933 MHz speed accelerates data throughput for demanding applications
  • ECC registered design detects and corrects errors to protect critical data
  • 2 V operation reduces power draw and heat in dense configurations
  • 288-pin RDIMM form factor fits compatible HP server platforms

Tekniset tiedot

BrandA-Tech
Capacity16GB
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Kysymyksiä tästä tuotteesta

Will the 16GB DDR4 2933 ECC RDIMM module itself require any scheduled maintenance or replacement?

No, the solid-state module has no moving parts and is designed for the life of the server; replacement is only needed if a fault occurs or capacity must be increased.

What limit appears first when the 1Rx4 registered DIMM runs at full DDR4 2933 speed continuously?

The memory controller’s maximum supported rank count per channel is reached before the single-rank module hits any thermal or bandwidth ceiling.

How much heat and power does the 1.20V DDR4 2933 RDIMM produce during all-day operation?

At the standard 1.20V the module draws minimal power and generates low heat, allowing passive airflow in a server chassis to keep temperatures in check.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.