Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green rectangular DDR4 DIMM with black chips and gold contacts

A-Tech

A-Tech 16GB DDR4 2933MHz ECC RDIMM 2Rx8 Server Memory 4ZC7A62799

SKU CH-6NC7-T7PJW

16GB DDR4 2933MHz ECC RDIMM server module with CL21 latency and 1.2V operation

  • Capacity16GB
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16 GB DDR4 2933 MHz ECC RDIMM boosts server throughput
  • CL21 latency and 1.20 V operation keep power draw low
  • 2Rx8 registered design adds data-integrity protection for critical workloads
  • 288-pin DIMM form factor matches standard server slots
  • Tested compatible replacement for IBM-Lenovo part 4ZC7A62799

Server-Ready ECC RDIMM

This 16 GB DDR4 registered DIMM operates at 2933 MHz with CL21 latency and 1.20 V. It uses a 2Rx8 organisation and major-brand chips to deliver error-correcting stability for supported server and workstation platforms. The module is a direct replacement for the IBM-Lenovo 4ZC7A62799 part number.

Compatibility-Critical Upgrade

It suits administrators expanding memory in qualified IBM-Lenovo systems that require ECC RDIMM modules at this speed and rank configuration. Builders needing unbuffered UDIMMs, different capacities, higher frequencies or non-ECC memory should look elsewhere because this module will not function in those roles.

Verified Module Only

The package contains the single tested 288-pin DIMM with no extra cables, brackets or software utilities. Quality-assurance screening and lifetime warranty coverage are supplied by the manufacturer, but they do not alter the hardware specification or installation requirements of the module itself.

Kohokohdat

  • 16 GB DDR4 2933 MHz ECC RDIMM boosts server throughput
  • CL21 latency and 1.20 V operation keep power draw low
  • 2Rx8 registered design adds data-integrity protection for critical workloads
  • 288-pin DIMM form factor matches standard server slots
  • Tested compatible replacement for IBM-Lenovo part 4ZC7A62799

Tekniset tiedot

BrandA-Tech
SeriesCompatible Replacement for IBM-Lenovo
Model4ZC7A62799
Capacity16GB
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor Brand Chipset
Features4ZC7A62799

Kysymyksiä tästä tuotteesta

Does my server need DDR4 288-pin RDIMM slots to use this 16GB 2933MHz ECC module?

Yes, this is a DDR4 288-pin registered DIMM; your motherboard must support DDR4 RDIMM slots and ECC memory for it to function correctly.

Can I mix this 2Rx8 CL21 1.2V stick with existing 1Rx8 DDR4 RDIMMs in the same channel?

Mixing ranks is possible if the platform supports it, but all modules will run at the lowest common speed and highest CAS latency; check your system's qualified vendor list for validated 2Rx8 configurations.

How do I confirm the module is running at 2933MHz with ECC active after installation?

Enter the BIOS or UEFI and verify the memory frequency shows 2933 MT/s, the voltage reads 1.20V, and ECC status reports as enabled or active for the installed 16GB DIMM.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.