Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green printed circuit board with black memory chips and gold edge connectors

A-Tech

A-Tech 16GB DDR4 3200 ECC RDIMM 1Rx4 Server RAM

SKU CH-EHVY-ZAQNJ

16 GB DDR4 3200 ECC registered DIMM with CL22 latency and 1.2 V operation for server and workstation upgrades

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16 GB DDR4 3200 ECC RDIMM adds registered server capacity
  • CL22 latency at 1.2 V delivers stable throughput
  • 1Rx4 Micron chipset ensures reliable error correction
  • 288-pin DIMM fits standard DDR4 server slots
  • Lifetime warranty with US-based tech support included

A-Tech 16GB DDR4 3200 ECC RDIMM

This 16GB registered DIMM targets server and workstation platforms that require ECC protection and registered signalling. It runs at DDR4 3200 (PC4-25600) with CL22 latency and 1.20V operation. The module uses a 1Rx4 organisation on Micron chipset.

288-pin DIMM installation and compatibility

Installation follows the standard 288-pin DDR4 DIMM procedure; seat the module until the retention clips engage. The registered design adds electrical load, so the memory controller must support registered DIMMs. Verify the platform qualified vendor list before purchase because unregistered systems will not accept this module.

16GB capacity headroom for ECC workloads

A single 16GB rank handles typical virtualisation, database and compute tasks that benefit from error correction. Workloads needing larger per-socket memory footprints will require additional populated slots up to the platform limit. Systems that do not support ECC or registered memory cannot use this module.

Kohokohdat

  • 16 GB DDR4 3200 ECC RDIMM adds registered server capacity
  • CL22 latency at 1.2 V delivers stable throughput
  • 1Rx4 Micron chipset ensures reliable error correction
  • 288-pin DIMM fits standard DDR4 server slots
  • Lifetime warranty with US-based tech support included

Tekniset tiedot

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMTA18ASF2G72PZ-3G2E2, MTA18ASF2G72PZ-3G2R1
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMicron Chipset
FeaturesMTA18ASF2G72PZ-3G2E2, MTA18ASF2G72PZ-3G2R1

Kysymyksiä tästä tuotteesta

How can I confirm the 16GB DDR4 3200 ECC RDIMM is running at CL22 and 1.20V after installation?

Enter the system BIOS or UEFI and open the memory information screen; it will show the detected speed as 3200 MT/s, the CAS latency as CL22, and the operating voltage as 1.20V, confirming the module is configured correctly.

What comes in the package and do I need any extra parts to install this 288-pin RDIMM?

The box contains a single 16GB 288-pin DDR4 ECC RDIMM; no additional cables, brackets, or cooling parts are required — just an available registered DIMM slot on a compatible server or workstation motherboard.

Which Micron part numbers does this A-Tech module replace so I can pick the right one?

This module is a compatible replacement for Micron MTA18ASF2G72PZ-3G2E2 and MTA18ASF2G72PZ-3G2R1; match either of those part numbers from your system’s memory list to ensure you select the correct version.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.