Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

A-Tech

A-Tech 16GB DDR4 3200MHz CL22 1.2V 288-Pin Desktop RAM

SKU CH-MN3R-06TQP

A 16GB DDR4 3200MHz CL22 1.2V unbuffered 288-pin DIMM tested for dependable desktop upgrades

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • Tested Frequency3200
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCNo
  • 16GB DDR4 3200MHz memory increases multitasking headroom
  • CL22 latency at 1.2V balances speed with standard power draw
  • 288-pin DIMM fits mainstream desktop motherboards
  • Non-ECC unbuffered design suits consumer platforms
  • Tested with major-brand chips for reliable operation

16GB DDR4 3200MHz Desktop Memory

This single 16GB DDR4 module runs at 3200MHz with CL22 latency and 1.2V operation. It fits standard 288-pin DIMM slots in desktop systems. The unbuffered, non-ECC design suits mainstream AMD and Intel platforms for general computing and multitasking.

Major brand chips and quality testing

Built with major brand chips, the module undergoes quality assurance testing for dependable performance. The 288-pin DIMM form factor installs directly into compatible motherboard slots without adapters. Standard 1.2V DDR4 voltage ensures broad compatibility with existing desktop power delivery.

Replaces listed Kingston DDR4 modules

This memory serves as a compatible replacement for Kingston parts including KF432C16RB1A/16, KVR32N22D8/16, HX432C16FB3/16 and related models. The upgrade is worthwhile when a system needs additional capacity or a direct substitute for a failed or slower DDR4 module. Verify your motherboard supports DDR4 3200MHz before purchase.

Kohokohdat

  • 16GB DDR4 3200MHz memory increases multitasking headroom
  • CL22 latency at 1.2V balances speed with standard power draw
  • 288-pin DIMM fits mainstream desktop motherboards
  • Non-ECC unbuffered design suits consumer platforms
  • Tested with major-brand chips for reliable operation

Tekniset tiedot

BrandA-Tech
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
Tested Frequency3200
CAS LatencyCL22
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chips
FeaturesMajor Brand Chipset
Recommend UseAMD & Intel Compatible

Kysymyksiä tästä tuotteesta

Does the DDR4 3200 module actually run at 3200 MT/s, or will it default to a lower JEDEC speed?

The stick is tested at 3200 MT/s and will operate at that rate when the motherboard enables the matching DDR4 profile; otherwise it falls back to the board's default DDR4 speed.

Will this 288-pin DIMM fit in a standard desktop slot, and does it need low-profile clearance?

It uses the regular 288-pin DDR4 DIMM form factor, so it fits any desktop DDR4 slot; the module is standard height, so check only for oversized CPU cooler overhang.

What is the correct way to seat the module, and what step do builders often miss?

Align the notch with the slot key, press straight down until both side clips snap shut, then verify the clips are fully locked — many builders stop at the first click and leave one side unlatched.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.