Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green circuit board with black memory chips, no heat spreader, 262-pin DDR5 SODIMM form factor

A-Tech

A-Tech 16GB DDR5 4800 ECC SODIMM 1Rx8 for Samsung M426R2GA3BB0-CQK server RAM

SKU CH-40HR-RRF5T

16 GB DDR5 4800 ECC SODIMM for Samsung M426R2GA3BB0-CQK microserver memory

  • Capacity16GB
  • Type262-Pin DDR5 SO-DIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS Latency40
  • Voltage1.10V
  • ECCYes
  • 16 GB DDR5 4800 MHz ECC SODIMM for microserver workloads
  • Error-correcting code protects data integrity in critical applications
  • 1Rx8 single-rank organisation keeps latency low
  • Standard 1.10 V DDR5 voltage reduces power draw
  • 262-pin SO-DIMM form factor fits compatible Samsung M426R2GA3BB0-CQK systems

16GB DDR5 ECC SODIMM for Samsung M426R2GA3BB0-CQK

This 16GB DDR5 4800 module is built as a direct replacement for the Samsung M426R2GA3BB0-CQK. It targets microserver, server and workstation users who need error-correcting memory in a compact SO-DIMM form factor. The unbuffered 1Rx8 design uses Samsung DRAM chips and runs at the standard 1.10V.

Build integration and slot requirements

The module fits a 262-pin DDR5 SO-DIMM slot and operates at PC5-38400 speed with CL40 latency. ECC capability adds data integrity for always-on workloads without requiring registered DIMM support. No heat spreader is fitted, so clearance is minimal and airflow from the chassis is sufficient.

Ideal for ECC SO-DIMM upgrades.

Buyers upgrading compatible Samsung-based microservers or NAS units will match the original spec exactly. Systems that accept only non-ECC memory, standard desktop UDIMM slots, or registered DIMMs cannot use this module. Check the system manual for supported memory seating and channel guidelines before ordering.

Kohokohdat

  • 16 GB DDR5 4800 MHz ECC SODIMM for microserver workloads
  • Error-correcting code protects data integrity in critical applications
  • 1Rx8 single-rank organisation keeps latency low
  • Standard 1.10 V DDR5 voltage reduces power draw
  • 262-pin SO-DIMM form factor fits compatible Samsung M426R2GA3BB0-CQK systems

Tekniset tiedot

BrandA-Tech
SeriesCompatible Replacement for Samsung M426R2GA3BB0-CQK
ModelA-Tech 16GB DDR5-4800 ECC SODIMM AIO RAM Module
Capacity16GB
Type262-Pin DDR5 SO-DIMM
SpeedDDR5 4800 (PC5 38400)
CAS Latency40
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetSamsung Chipset
Heat SpreaderNo
FeaturesMajor Brand DRAM IC Chips

Kysymyksiä tästä tuotteesta

Does the 1.1V voltage limit thermal headroom during continuous 4800 MHz operation?

The module runs at the standard 1.10V DDR5 voltage, so power draw and heat stay within normal SO-DIMM limits for all-day workloads.

How much heat does the 1Rx8 Samsung chipset produce without a spreader during sustained server loads?

Unbuffered ECC SODIMMs without a heat spreader rely on chassis airflow; the 1.10V rating keeps thermals manageable in typical microserver bays.

Must the host platform already support DDR5 4800 ECC unbuffered SO-DIMMs for this 262-pin module to function?

Yes — the system must accept DDR5 4800 ECC unbuffered 262-pin SO-DIMMs; consult the board manual to confirm compatibility.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.