Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Four green DDR3 240-pin ECC RDIMM modules in static bags

A-Tech

A-Tech 16GB Kit (4x4GB) DDR3 1333 ECC RDIMM Mac Pro 2010/2012 memory upgrade

SKU CH-1W6R-8BR51

16 GB kit of four 4 GB DDR3 1333 MHz ECC registered DIMMs for 2010 and 2012 Mac Pro towers

  • Capacity16GB (4 x 4GB)
  • SpeedDDR3 1333 (PC3 10600)
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor Brand Chipset
  • 16 GB total capacity in four 4 GB modules
  • DDR3 1333 MHz PC3-10600 registered ECC for data integrity
  • 240-pin RDIMM form factor fits Mac Pro 2010/2012
  • Certified compatible with MacPro5,1 and order MD771LL/A
  • Lifetime warranty with US-based technical support included

Designed for Mac Pro 2010 and 2012

This 16 GB kit contains four 4 GB DDR3 1333 registered ECC DIMMs built for the Mac Pro Mid 2010 and Mid 2012 models with 6-core or 12-core Xeon processors. It matches the Apple order numbers MD771LL/A and the MacPro5,1 model identifier. The modules run at 1.50 V and use major-brand chips on a 240-pin RDIMM form factor.

Suits owners of compatible Mac Pro towers

The kit fits Mac Pro towers listed as A1289 (EMC 2314-2 and EMC 2629) running the specified Xeon CPUs at 2.4, 2.66, 2.93, 3.06 and 3.33 GHz. It is not for users whose Mac Pro is a different model year or a different model identifier. It is also not for systems that require unbuffered memory or non-ECC modules.

Registered ECC RDIMM requirement

The Mac Pro 5,1 memory controller requires registered ECC DDR3 DIMMs; unbuffered or non-ECC sticks will not work. This kit provides exactly that 2Rx4 registered ECC specification at PC3-10600 speed. Verify your Mac Pro model identifier before purchase.

Kohokohdat

  • 16 GB total capacity in four 4 GB modules
  • DDR3 1333 MHz PC3-10600 registered ECC for data integrity
  • 240-pin RDIMM form factor fits Mac Pro 2010/2012
  • Certified compatible with MacPro5,1 and order MD771LL/A
  • Lifetime warranty with US-based technical support included

Tekniset tiedot

BrandA-Tech
SeriesA-Tech DDR3 Apple Mac RAM Memory Upgrades
Capacity16GB (4 x 4GB)
SpeedDDR3 1333 (PC3 10600)
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor Brand Chipset
Compatible SystemApple Mac Systems
FeaturesMajor Brand Chips

Kysymyksiä tästä tuotteesta

How can I confirm the 16GB kit is running at DDR3 1333MHz with ECC after installation?

Open About This Mac → System Report → Memory and verify each slot shows a 4GB DDR3 ECC RDIMM at 1333 MHz; the total should read 16GB.

What does the kit include and is anything else required for the Mac Pro?

The box contains four 4GB DDR3 1333 ECC registered 240-pin RDIMMs; no additional parts are needed for the listed Mac Pro models.

Which capacity kit should I choose for a Mac Pro 5,1 with a 2.4GHz Xeon E5645?

This 16GB (4×4GB) kit matches the four-slot configuration and is validated for the 2.4GHz Xeon E5645 in MacPro5,1.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.