Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

A-Tech

A-Tech 1TB (8x128GB) DDR4 2666 ECC RDIMM 2S4Rx4 Server RAM

SKU CH-YFTJ-QQFN2

Eight 128 GB DDR4 2666 ECC RDIMM modules provide 1 TB of registered server memory at CL19 and 1.2 V

  • Capacity1TB (8 x 128GB)
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 1TB (8 x 128GB)

  • 1TB capacity across eight 128GB modules
  • DDR4 2666 MHz speed for fast data throughput
  • ECC registered design corrects errors automatically
  • 2S4Rx4 3DS/TSV architecture enables high-density scaling
  • 20V standard voltage reduces power draw

1TB DDR4 ECC RDIMM Kit

This 1 TB kit contains eight 128 GB DDR4 2666 MHz registered DIMMs with ECC. Each module uses a 2S4Rx4 octal-rank 3DS layout on a 288-pin form factor. The memory is built for servers and workstations that require registered ECC DDR4 modules.

Upgrade From Lower-Capacity DDR4 RDIMMs

The jump makes sense when a DDR4 server platform supports 128 GB modules per slot and the workload needs more memory channels populated. Moving from smaller RDIMMs to this 1 TB kit increases total capacity without changing voltage or speed.

Suits DDR4 Servers Needing Maximum Capacity

It fits administrators expanding memory on qualified DDR4 server or workstation boards that accept 288-pin registered ECC modules at 2666 MHz. Buyers whose systems only support unbuffered DDR4, a different DDR generation, or lower maximum module density should look elsewhere.

Kohokohdat

  • 1TB capacity across eight 128GB modules
  • DDR4 2666 MHz speed for fast data throughput
  • ECC registered design corrects errors automatically
  • 2S4Rx4 3DS/TSV architecture enables high-density scaling
  • 20V standard voltage reduces power draw

Tekniset tiedot

BrandA-Tech
SeriesA-Tech DDR4 Server Memory RAM
ModelA-Tech 128GB 2S4Rx4 PC4-2666V-R
Capacity1TB (8 x 128GB)
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2S4Rx4 (8Rx4 3DS/TSV)
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will these 288-pin DDR4 RDIMMs fit in a standard server DIMM slot?

Yes, each module uses the 288-pin DDR4 RDIMM form factor designed for server and workstation DIMM slots only; they are not compatible with desktop or laptop memory sockets.

What is the correct seating procedure for the 8Rx4 3DS registered modules?

Align the notch on each 288-pin module with the slot key, press straight down until both side clips click shut, and follow the motherboard manual for channel population order; the most common error is stopping before the clips fully engage.

When should the 1.2 V DDR4 2666 CL19 kit be replaced or re-validated?

Run a full memory diagnostic after any firmware update or hardware change; otherwise, ECC RDIMMs typically run for the life of the server and only need replacement if correctable error counts rise sharply or a module fails POST.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.