A-Tech 16GB DDR4 2400 ECC RDIMM 2Rx8 CL17 1.2V 288-Pin Server RAM
- 16GB
- DDR4 2400 (PC4 1920…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
A 32 GB dual-channel kit of two 16 GB DDR4 2133 ECC registered DIMMs at CL15 and 1.2 V
Capacity 32GB (2 x 16GB)
This 32GB kit contains two 16GB DDR4 2133 registered DIMMs with ECC and CL15 latency. It operates at the standard 1.20V voltage and uses a dual-rank x4 organisation across 288 pins. The modules are built for servers and workstations that require registered memory and will not function in standard desktop or laptop systems.
The registered buffer reduces electrical load on the memory controller, allowing larger capacities per channel while ECC corrects single-bit errors to protect data integrity. The 2Rx4 configuration increases bank density for heavier workloads. Together these features change how the system handles memory stress compared to unbuffered non-ECC alternatives.
This kit suits administrators upgrading compatible DDR4 servers or workstations that specifically call for registered ECC RDIMMs. It is not for desktop PCs, laptops or any platform that accepts only unbuffered memory. Buyers needing higher speeds, different capacities or non-ECC modules should look at other product lines.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 Server Memory RAM |
| Model | A-Tech 16GB 2Rx4 PC4-2133P-R |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Multi-channel Kit | Dual Channel Kit |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The modules operate at standard 1.2V DDR4 voltage with major-brand chips and undergo quality-assurance testing; no firmware updates or scheduled replacement are needed for ECC functionality.
The CL15 CAS latency at DDR4 2133 (PC4-17000) sets the timing boundary that appears before bandwidth or thermal limits during continuous operation.
Each module runs at the standard 1.20V DDR4 voltage, so total power draw stays at the JEDEC baseline for 32 GB of registered memory with no extra cooling required.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?