A-Tech
A-Tech 32GB (2x16GB) DDR5 4800 ECC SODIMM CL40 1.1V laptop RAM
A dual-channel 32 GB kit of DDR5 4800 ECC SODIMM memory with CL40 latency and 1.1 V operation
- Capacity32GB (2 x 16GB)
- Type262-Pin DDR5 SO-DIMM
- SpeedDDR5 4800 (PC5 38400)
- CAS LatencyCL40
- Voltage1.10V
- ECCYes
- ECC protection guards data integrity with single-rank 1Rx8 DDR5 modules
- Dual-channel 32GB kit (2 x 16GB) scales multitasking headroom
- JEDEC-standard 1.1V operation keeps thermals low in compact chassis
- 4800 MT/s CL40 speed accelerates workloads on supported mobile workstations
- 262-pin SO-DIMM form factor fits DDR5 ECC SODIMM slots in microservers and NAS
32GB DDR5 ECC SODIMM kit
This 32GB kit contains two 16GB DDR5 ECC SODIMM modules rated at 4800 MT/s with CL40 latency and 1.1V operation. It is built for mobile workstations, microservers and NAS appliances that require error-correcting memory in the 262-pin form factor. The unbuffered, single-rank design suits systems qualified for ECC SODIMM support.
Straightforward SODIMM installation
Installation follows the usual SODIMM procedure: power off the device, open the memory compartment, align the notch on the 262-pin module and press firmly until the retention clips engage. The most common issue is purchasing this kit for a platform that does not support ECC SODIMM; the modules will physically fit but the system will not boot or will disable ECC. Verify the motherboard or laptop manual for ECC SODIMM qualification before ordering.
Capacity and headroom
The 32GB dual-channel kit handles typical virtualisation workloads, ZFS metadata caching and multi-application workloads on supported mobile workstations and NAS units. Headroom diminishes when running many concurrent virtual machines, large in-memory databases or heavy container fleets that exceed the 32GB limit; such scenarios require a platform that accepts higher-capacity ECC SODIMM modules.
Kohokohdat
- ECC protection guards data integrity with single-rank 1Rx8 DDR5 modules
- Dual-channel 32GB kit (2 x 16GB) scales multitasking headroom
- JEDEC-standard 1.1V operation keeps thermals low in compact chassis
- 4800 MT/s CL40 speed accelerates workloads on supported mobile workstations
- 262-pin SO-DIMM form factor fits DDR5 ECC SODIMM slots in microservers and NAS
Tekniset tiedot
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR5 ECC SODIMM |
| Model | A-Tech 16GB 1Rx8 PC5-38400 ECC SODIMM |
| Part Number | NE-SS-0615 |
| Capacity | 32GB (2 x 16GB) |
| Type | 262-Pin DDR5 SO-DIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | CL40 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Heat Spreader | No |
| Features | ECC SODIMM |
| Recommend Use | AMD & Intel Compatible |
| Option | ECC SODIMM |
Kysymyksiä tästä tuotteesta
How do I confirm the kit is running at DDR5 4800 CL40 after installation?
Open Task Manager or CPU-Z and check the memory tab; it should show 4800 MT/s and CAS latency 40 at 1.10 V.
What comes in the box and what must I source separately?
The package contains two 16 GB 262-pin DDR5 ECC SODIMM modules; no screwdriver, thermal pad or additional hardware is included.
Which capacity or version should I choose for a dual-channel microserver?
This 32 GB dual-channel kit (2 × 16 GB, 1Rx8) is the only version listed; select it when your system supports DDR5 ECC unbuffered SODIMMs.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.



