A-Tech 32GB (4x8GB) DDR3 1600 ECC RDIMM 1Rx4 1.5V Server RAM
- 32GB (4 x 8GB)
- DDR3 1600 (PC3 1280…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
32 GB quad-channel DDR3L 1600 ECC registered server memory kit running at 1.35 V
Capacity 32GB (4 x 8GB)
Speed DDR3L 1600 (PC3L 12800)
This 32 GB quad-channel kit contains four 8 GB DDR3L 1600 registered ECC DIMMs built for servers and workstations. Each module runs at 1.35 V with CL11 latency and a 2Rx4 dual-rank layout on 240-pin form factor. It is not compatible with desktop or laptop computers.
Low-voltage DDR3L operation at 1.35 V reduces power draw and heat output compared with standard 1.5 V DDR3 modules. Registered buffering lightens the electrical load on the memory controller, helping stability under sustained workloads. No active cooling is included or required for normal server use.
The matched quad-channel set enables full bandwidth on platforms that support four-channel memory architectures. ECC error correction detects and corrects single-bit errors to protect data integrity in critical applications. Lifetime warranty and US-based technical support are provided by the manufacturer.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR3 Server Memory RAM |
| Model | A-Tech 8GB 2Rx4 PC3L-12800R |
| Capacity | 32GB (4 x 8GB) |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Multi-channel Kit | Quad Channel Kit |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Power down the server, open the chassis, align each module's notch with the DDR3 DIMM slot key, press firmly until the retention clips lock, then populate all four channels per the system manual to enable quad-channel operation.
No scheduled maintenance is required; ECC error correction and the registered buffer operate transparently, so only reseat the modules if the system reports correctable errors after a hardware move.
CL11 at 1600 MHz sets the minimum access delay; once the memory controller saturates bandwidth, latency dominates response time rather than throughput.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?