Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

A-Tech

A-Tech 32GB (4x8GB) DDR4 2133 ECC RDIMM 1Rx8 Server RAM

SKU CH-JE26-T23VE

A 32 GB quad-channel kit of four 8 GB DDR4 2133 ECC registered DIMMs for servers and workstations

  • Capacity32GB (4 x 8GB)
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes

Capacity 32GB (4 x 8GB)

  • 32 GB quad-channel kit expands server memory capacity
  • ECC registered DIMMs protect data integrity in critical workloads
  • DDR4 2133 MHz CL15 speed accelerates application responsiveness
  • 2 V standard voltage reduces power draw per module
  • 288-pin single-rank x8 design fits compatible server platforms

Server DDR4 ECC RDIMM kit

This 32 GB kit contains four 8 GB DDR4 2133 MHz modules built for servers and workstations that require registered ECC memory. Each stick is a 1Rx8 single-rank DIMM running at 1.20 V with CL15 latency. The quad-channel pack adds capacity across four slots to support heavier multi-threaded workloads.

Registered 288-pin DIMM build

The modules use a standard 288-pin DDR4 RDIMM form factor with on-board register circuitry that buffers address and command signals for improved signal integrity in multi-DIMM configurations. Major-brand chips and error-correcting technology protect data integrity in mission-critical environments. No heat spreaders are fitted, so airflow in the chassis handles cooling directly.

Upgrade for DDR4 ECC RDIMM platforms

This kit replaces smaller or slower registered ECC sets in compatible DDR4 servers and workstations that accept 1Rx8 modules at 2133 MHz. The jump is worthwhile when the system supports quad-channel operation and the workload demands more than the current installed capacity. It will not fit desktop or laptop boards that require unbuffered non-ECC memory.

Kohokohdat

  • 32 GB quad-channel kit expands server memory capacity
  • ECC registered DIMMs protect data integrity in critical workloads
  • DDR4 2133 MHz CL15 speed accelerates application responsiveness
  • 2 V standard voltage reduces power draw per module
  • 288-pin single-rank x8 design fits compatible server platforms

Tekniset tiedot

BrandA-Tech
SeriesA-Tech DDR4 Server Memory RAM
ModelA-Tech 8GB 1Rx8 PC4-2133P-R
Part NumberAT8G4D4D2133RS8N12V
Capacity32GB (4 x 8GB)
Type288-Pin DDR4 SDRAM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
Multi-channel KitQuad Channel Kit
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesMajor Brand Chips / Error Correcting Technology for Server Systems

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What DDR4 speed and PC4 rating does this 2133 MHz kit run at?

The modules operate at DDR4 2133 MHz with a PC4-17000 data rate and CL15 latency at 1.20 V.

What physical slot and pin count do these 288-pin RDIMMs require?

They fit standard DDR4 DIMM sockets with 288 pins and need a server or workstation motherboard that supports registered ECC memory.

How do I install this quad-channel 4x8GB kit in the correct slots?

Populate all four modules in the same coloured slots per channel following the motherboard manual; the common mistake is mixing channels or leaving a slot empty.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.