Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

A-Tech

A-Tech 32GB (8x4GB) DDR3 1333 ECC UDIMM 2Rx8 1.5V 240-Pin Server RAM

SKU CH-81HN-5T70R

Eight 4 GB DDR3 1333 ECC unbuffered DIMMs totalling 32 GB for servers and workstations

  • Capacity32GB (8 x 4GB)
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredUnbuffered

Capacity 32GB (8 x 4GB)

Speed DDR3 1333 (PC3 10600)

  • 32 GB kit with eight 4 GB modules expands server capacity
  • DDR3 1333 MHz speed accelerates data throughput for workloads
  • ECC unbuffered design detects and corrects memory errors
  • 2Rx8 dual-rank organisation increases memory density per slot
  • 5 V standard voltage ensures broad DDR3 platform compatibility

32 GB DDR3 ECC kit for servers

This 32 GB kit contains eight 4 GB DDR3 1333 ECC UDIMM modules built for servers and workstations that require error-correcting unbuffered memory. Each module runs at 1.5 V and uses a 240-pin DIMM form factor with dual-rank x8 organisation. The kit is not compatible with standard desktop or laptop platforms.

Steady throughput with ECC protection

ECC circuitry detects and corrects single-bit errors during continuous operation, helping maintain data integrity under sustained workloads. Unbuffered signalling keeps latency low while the dual-rank layout allows the memory controller to interleave accesses across ranks. Rated CL9 timing at 1333 MHz provides consistent bandwidth for virtualisation, database and file-server tasks.

Major-brand chips on validated modules

Modules use major-brand DRAM components and undergo quality-assurance testing before shipment. The 240-pin DDR3 keying prevents accidental installation in incompatible slots, while the 1.5 V standard voltage matches existing DDR3 server power budgets. Eight modules fill all DIMM slots on many dual-socket boards, so verify channel population rules in the system manual before installing.

Kohokohdat

  • 32 GB kit with eight 4 GB modules expands server capacity
  • DDR3 1333 MHz speed accelerates data throughput for workloads
  • ECC unbuffered design detects and corrects memory errors
  • 2Rx8 dual-rank organisation increases memory density per slot
  • 5 V standard voltage ensures broad DDR3 platform compatibility

Tekniset tiedot

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 4GB 2Rx8 PC3-10600E
Capacity32GB (8 x 4GB)
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How much power does each 4 GB DDR3 1333 module draw at 1.5 V during continuous server workloads?

Each module operates at the standard DDR3 voltage of 1.5 V; total kit capacity is 32 GB across eight 4 GB sticks.

What motherboard slot type and memory controller features are required to run this ECC UDIMM kit?

The kit uses 240-pin DDR3 DIMM slots and requires a server or workstation platform that supports unbuffered ECC memory.

Will these dual-rank 2Rx8 DDR3 1333 modules work in an older system that only accepts single-rank PC3-10600 DIMMs?

The modules are dual-rank 2Rx8 at DDR3 1333 (PC3-10600E); compatibility depends on whether the older system's memory controller supports dual-rank unbuffered ECC DIMMs.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.