NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
32GB kit of eight 4GB DDR4 2133 ECC unbuffered DIMMs for servers and workstations
This 32 GB kit contains eight 4 GB DDR4 2133 modules built for servers and workstations that require error-correcting unbuffered memory. Each stick is a single-rank 1Rx8 design running at 1.2 V with CL15 latency. The modules are not compatible with standard desktop or laptop platforms.
ECC circuitry corrects single-bit errors in real time, preventing silent data corruption during long compute runs or virtualization tasks. Unbuffered topology keeps latency low across all populated channels, while the single-rank layout helps the memory controller maintain consistent timing under sustained load.
The 288-pin UDIMM form factor slots directly into standard server boards without extra height from heat spreaders. Major-brand chips are tested for reliability before shipping, and the kit arrives as eight matched modules to simplify channel population.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 Server Memory RAM |
| Model | A-Tech 4GB 1Rx8 PC4-2133P-E |
| Part Number | AT4G8D4D2133US8N12V |
| Capacity | 32GB (8 x 4GB) |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | Major Brand Chips / Error Correcting Technology for Server & Workstation Systems |
Each module operates at the standard DDR4 voltage of 1.20 V; actual wattage depends on the server platform and workload.
The kit needs eight 288-pin DDR4 UDIMM slots and a CPU or chipset that supports ECC unbuffered DDR4 2133 memory.
No — unbuffered ECC UDIMMs and registered ECC RDIMMs cannot be mixed; all slots must use the same module type.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?