Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 288-pin DDR4 DIMM with black chips and silver label

A-Tech

A-Tech 32GB DDR4 2933 ECC RDIMM 2Rx8 Server Memory

SKU CH-R60H-1HVGX

32 GB DDR4 2933 MHz ECC registered DIMM with 2Rx8 organisation and 1.2 V operation

  • Capacity32GB
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 32 GB capacity handles heavy server workloads
  • DDR4 2933 MHz speed accelerates data throughput
  • ECC RDIMM design protects against data corruption
  • Registered 2Rx8 architecture supports dense configurations
  • 20 V operation meets standard DDR4 voltage

32GB DDR4 2933 ECC RDIMM

This A-Tech module delivers 32GB of DDR4 2933 registered ECC memory in a single 288-pin DIMM. It runs at 1.2V with CL21 latency and a 2Rx8 organisation using major brand chips. The part is a compatible equivalent for Micron MTA18ASF4G72PDZ-2G9 and is tested for dependable server performance.

Suits servers needing registered ECC.

Registered ECC RDIMMs require a platform that supports registered, error-correcting memory; standard consumer desktops and laptops cannot use them. Buyers who need unbuffered non-ECC DDR4 or a different speed grade should look at other modules. Verify your system's qualified vendor list before purchase.

Registered ECC with 2Rx8 organisation

The registered buffer and on-die ECC are the decisive specifications; without motherboard support for registered ECC the module will not function. The 2Rx8 rank configuration and 1.2V operation follow the DDR4 2933 standard for qualified server platforms.

Kohokohdat

  • 32 GB capacity handles heavy server workloads
  • DDR4 2933 MHz speed accelerates data throughput
  • ECC RDIMM design protects against data corruption
  • Registered 2Rx8 architecture supports dense configurations
  • 20 V operation meets standard DDR4 voltage

Tekniset tiedot

BrandA-Tech
Capacity32GB
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Kysymyksiä tästä tuotteesta

How do I install the 288-pin DDR4 RDIMM and what step is often missed?

Power down the server, open the chassis, align the module notch with the slot key, press firmly until both retention clips lock, then verify in BIOS that the 32GB 2Rx8 module is recognised at 2933MHz.

What maintenance or replacement will this 32GB ECC RDIMM need over time?

No routine maintenance is required; if a correctable error count rises or the module fails POST, replace the DIMM — the 2Rx8 registered design is not user-serviceable beyond full module swap.

What limit appears first when this DDR4 2933 1.20V RDIMM runs sustained workloads?

The registered buffer and CL21 latency set the throughput ceiling; under continuous load the memory controller hits the 2933MT/s data-rate limit before thermal throttling becomes a factor.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.