NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
32 GB DDR4 3200 MHz ECC registered DIMM with 2Rx4 organisation, CL22 latency and 1.2 V operation
This 32GB DDR4 3200MHz ECC registered DIMM is built for server and workstation systems that require error-correcting memory. It uses major-brand chips and a 2Rx4 organisation to deliver reliable performance in multi-socket platforms. The module runs at the standard 1.20V DDR4 voltage.
The 288-pin DDR4 DIMM plugs into registered memory slots on compatible server and workstation motherboards. Registered buffering reduces electrical load on the memory controller, freeing headroom for larger memory populations. Verify your system's qualified vendor list before installation to ensure support for this 2Rx4 configuration.
A single 32GB module handles memory-intensive workloads such as virtualization, database caching and large dataset processing. CAS latency of 22 at 3200MHz provides stable throughput for sustained server tasks. Systems needing more than 32GB per channel or higher frequencies will require additional modules or faster-rated memory.
| Brand | A-Tech |
|---|---|
| Capacity | 32GB |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The module operates at CL22 latency, which is the timing figure that governs how quickly the memory responds to read requests under sustained workloads.
At the standard DDR4 voltage of 1.20 V the module draws minimal power, and the registered buffer helps keep heat output low during all-day operation.
You need a server or workstation board with DDR4 RDIMM slots (288-pin) and a chipset that supports ECC registered memory; consumer desktop platforms will not accept this module.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?