Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

A-Tech

A-Tech 4GB (2x2GB) DDR3 1066MHz PC3-8500 UDIMM CL7 desktop RAM

SKU CH-HQT8-HA1J2

Dual-channel 4 GB DDR3 kit at 1066 MHz with CL7 timing and 1.5 V operation

  • Capacity4GB (2 x 2GB)
  • Type240-Pin PC RAM
  • SpeedDDR3 1066 (PC3 8500)
  • Tested Frequency1066
  • Voltage1.50V
  • ECCNo
  • Dual-channel kit doubles bandwidth for smoother multitasking
  • CL7 latency at 1066 MHz keeps data moving quickly
  • 5 V operation matches standard desktop DDR3 requirements
  • 240-pin UDIMM fits mainstream DDR3 motherboards
  • Major-brand chips tested for dependable desktop performance

A-Tech DDR3 1066 UDIMM Kit

This A-Tech desktop memory kit delivers 4 GB as two 2 GB DDR3 unbuffered DIMMs. Each module runs at 1066 MHz with a CL7 latency and operates at the standard 1.5 V. The 240-pin PC3-8500 design fits dual-channel desktop boards that accept non-ECC DDR3 memory.

Suits DDR3 dual-channel builds.

Builders upgrading older AMD or Intel platforms that specify DDR3 1066 non-ECC UDIMM will find this kit a direct match. Systems that require ECC, registered modules, or a different voltage should look elsewhere.

PC3-8500 speed rating determines compatibility

The 1066 MHz PC3-8500 rating is the single specification that decides whether this kit works in a given motherboard. Verify that the board lists DDR3 1066 (PC3-8500) support before purchase.

Kohokohdat

  • Dual-channel kit doubles bandwidth for smoother multitasking
  • CL7 latency at 1066 MHz keeps data moving quickly
  • 5 V operation matches standard desktop DDR3 requirements
  • 240-pin UDIMM fits mainstream DDR3 motherboards
  • Major-brand chips tested for dependable desktop performance

Tekniset tiedot

BrandA-Tech
SeriesA-Tech DDR3 Desktop Memory RAM
Model4GB Kit (2x2GB) PC3-8500 Non-ECC DIMM
Part NumberNE-SS-0693
Capacity4GB (2 x 2GB)
Type240-Pin PC RAM
SpeedDDR3 1066 (PC3 8500)
Tested Frequency1066
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesMajor Brand Chips
Recommend UseAMD & Intel Compatible

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will this kit fit my DDR3 desktop motherboard?

The kit uses 240-pin DDR3 UDIMM modules at 1.5 V, the standard format for desktop DDR3 boards.

What speed will the memory run at out of the box?

The modules are tested at 1066 MHz (PC3-8500) with CL7 timings.

Can I install this alongside my existing DDR3 sticks?

Yes, it is a non-ECC unbuffered dual-channel kit; matching voltage and speed with your current RAM will give the best stability.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.