NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
4 GB DDR3 1066 ECC registered DIMM with 4Rx8 organisation and 1.5 V operation
This 4 GB registered DIMM runs at DDR3 1066 (PC3-8500) with ECC and a 4Rx8 organisation. It is built for server and workstation platforms that require registered, error-correcting memory. The module uses major-brand chips and operates at the standard 1.5 V DDR3 voltage.
Verify that your system accepts DDR3 1066 registered ECC DIMMs and can address 4Rx8 modules. Confirm the motherboard or server documentation lists PC3-8500 speed and 1.5 V operation. Ensure the 240-pin form factor matches the memory slots and that the platform supports the 4 GB density per slot.
This module suits administrators replacing or matching the Samsung M393B5173EH1-CF8 part in compatible servers. It is not for desktop boards that require unbuffered non-ECC memory, nor for systems limited to lower rank counts or different DDR generations. Buyers needing higher capacities per slot or faster DDR3 speeds should look elsewhere.
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Speed | DDR3 1066 (PC3 8500) |
| CAS Latency | CL7 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The package contains one 4GB DDR3 1066 ECC RDIMM module with 240 pins; no extra parts are required beyond a compatible DDR3 registered DIMM slot.
This listing is a single 4GB 4Rx8 module; choose it when your server needs a 4GB registered ECC DIMM at 1066 MHz and has an available 240-pin slot.
PC3-8500 identifies the module as DDR3 1066 with CL7 latency at 1.5V, so the memory controller will run it at 1066 MHz with those timings when the system supports the specification.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?