Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 240-pin DDR3 DIMM with black memory chips

A-Tech

A-Tech 4GB DDR3 1333MHz ECC UDIMM 2Rx8 240-Pin Server Memory

SKU CH-MQH2-SBYF7

4GB DDR3 1333MHz ECC UDIMM 2Rx8 240-Pin server memory for Micron MT18JSF51272AZ-1G4D1 compatibility

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ECC protection prevents data corruption with built-in error correction
  • 1333 MHz DDR3 speed delivers responsive server performance
  • 4 GB capacity expands memory for heavier workloads
  • 240-pin UDIMM fits standard server DIMM slots
  • 5 V operation matches DDR3 standard voltage

4GB DDR3 1333MHz ECC UDIMM for Servers

This 4GB DDR3 1333MHz ECC UDIMM module is built for server and workstation systems that require error-correcting memory. It operates at 1.5V with CL9 latency and uses a 2Rx8 rank configuration. The 240-pin DIMM form factor fits standard DDR3 slots in compatible enterprise platforms.

Compatibility checks before ordering

Verify that your system supports DDR3 1333MHz (PC3-10600) unbuffered ECC memory and accepts 240-pin UDIMM modules. Confirm the motherboard or server documentation allows 2Rx8 rank organisation and 1.5V operation. Ensure there is a free DIMM slot and that the platform does not require registered or load-reduced memory instead.

Upgrading from non-ECC or lower-capacity DDR3

This module replaces non-ECC DDR3 DIMMs or smaller-capacity ECC sticks in supported servers and workstations. The jump is worthwhile when data integrity matters for critical workloads or when the platform demands ECC unbuffered memory. It does not suit systems that require registered RDIMMs, LR-DIMMs, or a different DDR generation.

Kohokohdat

  • ECC protection prevents data corruption with built-in error correction
  • 1333 MHz DDR3 speed delivers responsive server performance
  • 4 GB capacity expands memory for heavier workloads
  • 240-pin UDIMM fits standard server DIMM slots
  • 5 V operation matches DDR3 standard voltage

Tekniset tiedot

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMT18JSF51272AZ-1G4D1
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMicron Chipset
FeaturesMT18JSF51272AZ-1G4D1

Kysymyksiä tästä tuotteesta

What comes in the box and is anything else needed to install this module?

The package includes one 4GB DDR3 1333MHz ECC UDIMM; no extra parts are required for installation in a compatible 240-pin slot.

Should I choose a different capacity or speed for my server?

This module is a single 4GB stick at 1333MHz; select additional identical modules to reach your system's supported total capacity and populate channels evenly.

What does the 1333MHz rating mean once the module is running in my machine?

The memory operates at 1333MHz with CL9 latency and 1.5V, delivering the rated DDR3 throughput when the platform's memory controller is set to that speed.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.