Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

A-Tech

A-Tech 4GB DDR3 1333MHz PC3-10600 240-Pin 1Rx8 Desktop RAM Hynix HMT451U6AFR8C-H9 Replacement

SKU CH-YTYJ-YESHA

4GB DDR3 1333MHz PC3-10600 240-pin unbuffered desktop module replaces Hynix HMT451U6AFR8C-H9 and compatible part numbers at 1.5V

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • Tested Frequency1333
  • Voltage1.50V
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • Adds 4 GB capacity for smoother multitasking
  • Runs at DDR3 1333 MHz for responsive performance
  • Standard 1.5 V DDR3 voltage keeps power draw low
  • 240-pin DIMM fits common desktop slots
  • Tested replacement for Hynix HMT451U6AFR8C-H9 and related part numbers

Direct Replacement for Hynix HMT451U6AFR8C-H9

This 4GB DDR3 module replaces Hynix HMT451U6AFR8C-H9, HMT451U6BFR8C-H9, HMT451U6DFR8C-H9 and HMT451U6MFR8C-H9. It is built for desktop computers needing a PC3-10600 upgrade. Buyers who need ECC error correction or registered buffering cannot use this kit.

Simple 240-Pin DIMM Installation

The unbuffered DIMM seats in a standard 240-pin desktop slot with no tools or configuration required. Systems limited to lower voltages or laptop SO-DIMM form factors will not accept this module.

DDR3 1333MHz PC3-10600 at 1.5V

The single specification that decides fit is the DDR3 1333MHz PC3-10600 rating at 1.50V. If the motherboard calls for a different speed, voltage or DDR generation, this module will not work.

Kohokohdat

  • Adds 4 GB capacity for smoother multitasking
  • Runs at DDR3 1333 MHz for responsive performance
  • Standard 1.5 V DDR3 voltage keeps power draw low
  • 240-pin DIMM fits common desktop slots
  • Tested replacement for Hynix HMT451U6AFR8C-H9 and related part numbers

Tekniset tiedot

BrandA-Tech
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
Tested Frequency1333
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
Recommend UseAMD & Intel Compatible

Kysymyksiä tästä tuotteesta

Will this 4 GB DDR3 1333 MHz module work in a desktop that currently uses a Hynix HMT451U6AFR8C-H9 stick?

Yes, it is built as a direct replacement for Hynix HMT451U6AFR8C-H9, HMT451U6BFR8C-H9, HMT451U6DFR8C-H9 and HMT451U6MFR8C-H9 modules.

My motherboard has 240-pin DDR3 slots and runs at 1.5 V — is the voltage and pin count a match?

The module uses the standard DDR3 voltage of 1.50 V and a 240-pin DIMM form factor, matching those slot specifications.

I want to add this stick alongside an existing 4 GB DDR3 1333 MHz kit — will they run together at the rated speed?

Both kits share the same 1333 MHz frequency and PC3-10600 rating, so the system should operate them at that speed when installed together.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.