Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 240-pin DDR3 ECC RDIMM module with black chips

A-Tech

A-Tech 4GB DDR3 1333MHz PC3-10600 ECC RDIMM 1Rx4 Server Memory

SKU CH-NSQ3-6K3DD

4GB DDR3 1333MHz ECC registered DIMM for server upgrades with 1Rx4 layout

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection prevents data corruption in servers
  • Registered design stabilises heavy multi-module loads
  • DDR3 1333 MHz speed matches PC3-10600 system specs
  • 240-pin DIMM fits standard DDR3 server slots
  • Tested replacement for IBM-Lenovo 03X3811 and 0A89411

Server DDR3 ECC RDIMM 4GB

This A-Tech module is a 4GB DDR3 1333MHz PC3-10600 ECC Registered DIMM built for server and workstation systems. It operates at the standard 1.5V DDR3 voltage with CL9 latency and a 1Rx4 rank configuration using major brand chips. The 240-pin form factor fits compatible DDR3 RDIMM slots in supported platforms.

Suits IBM-Lenovo part replacements

It serves as a direct replacement for IBM-Lenovo part numbers 03X3811 and 0A89411, making it suitable for administrators maintaining those specific systems. Builders needing unbuffered UDIMMs, higher capacities, different speeds, or other DDR generations should look at other modules.

Registered ECC with 1Rx4 organisation

The Registered ECC design with 1Rx4 organisation is the specification that determines whether this module works in a given server. Systems that require unbuffered memory or a different rank structure will not accept this DIMM, so verifying the platform's supported memory specification is essential before purchase.

Kohokohdat

  • ECC protection prevents data corruption in servers
  • Registered design stabilises heavy multi-module loads
  • DDR3 1333 MHz speed matches PC3-10600 system specs
  • 240-pin DIMM fits standard DDR3 server slots
  • Tested replacement for IBM-Lenovo 03X3811 and 0A89411

Tekniset tiedot

BrandA-Tech
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Kysymyksiä tästä tuotteesta

How do I install the 240-pin DDR3 DIMM and which step do people often miss?

Align the notch on the module with the slot key, press down firmly until both retaining clips click shut, then verify the system recognises the full 4 GB capacity in BIOS.

What maintenance or replacement will this 1.50 V registered ECC module need later?

No routine maintenance is required; the module either continues operating or is replaced if a memory test reports correctable errors that exceed the platform threshold.

What limit appears first when this CL9 1333 MHz kit runs under sustained load?

The DDR3 1333 MT/s data rate and CL9 latency set the maximum sustained bandwidth; the registered buffer adds one cycle but does not create an earlier thermal or power ceiling.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.