Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green printed circuit board with black memory chips, no heat spreader, 240-pin DIMM edge connector

A-Tech

A-Tech 4GB DDR3 1600 Desktop RAM 992002

SKU CH-WNQG-QXFJM

4 GB DDR3 desktop module running at 1600 MHz with CL11 latency and 1.5 V operation

  • Capacity4GB
  • SpeedDDR3 1600 (PC3 12800)
  • Tested Frequency1600
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCNo
  • 4GB capacity expands multitasking headroom for everyday desktop workloads
  • DDR3 1600 speed at PC3-12800 rating accelerates data throughput
  • CL11 latency at 1.5V standard voltage balances responsiveness and stability
  • 240-pin unbuffered DIMM fits standard desktop memory slots
  • Tested replacement for Mushkin 992002 ensures drop-in compatibility

Capacity and Speed

This is a 4 GB DDR3 desktop memory module rated at 1600 MHz with PC3-12800 bandwidth. It uses a 240-pin DIMM form factor, runs at 1.5 V, and has a CAS latency of CL11. The module is unbuffered and non-ECC, making it a standard upgrade for compatible desktop systems.

Compatibility Focus

It is built as a direct replacement for the Mushkin 992002 part number and suits owners of that specific module or systems with matching DDR3 specifications. Buyers whose platforms require ECC, registered DIMMs, a different voltage, or a newer DDR generation should select a different product.

Tested Reliability

Every unit undergoes quality-assurance testing to verify dependable operation at the rated speed and timings. The validated performance means the module installs and runs at its advertised 1600 MHz CL11 settings without additional configuration.

Kohokohdat

  • 4GB capacity expands multitasking headroom for everyday desktop workloads
  • DDR3 1600 speed at PC3-12800 rating accelerates data throughput
  • CL11 latency at 1.5V standard voltage balances responsiveness and stability
  • 240-pin unbuffered DIMM fits standard desktop memory slots
  • Tested replacement for Mushkin 992002 ensures drop-in compatibility

Tekniset tiedot

BrandA-Tech
SeriesCompatible Replacement for Mushkin
Model992002
Capacity4GB
SpeedDDR3 1600 (PC3 12800)
Tested Frequency1600
CAS LatencyCL11
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset
Heat SpreaderNo
Features992002
Recommend UseCompatible Replacement for Mushkin 992002

Kysymyksiä tästä tuotteesta

My motherboard has 240-pin DDR3 slots — will this 1.5 V module seat and run without extra power connectors?

Yes, the stick is a standard 240-pin DDR3 DIMM that draws its power from the slot at 1.5 V, so no auxiliary cables are needed.

I still have a CL9 DDR3-1600 kit installed; will this CL11 module force both kits to run at the slower latency?

The motherboard will default all populated slots to the highest common latency, so the existing CL9 kit will drop to CL11 timings when this module is added.

After installation the BIOS shows 1600 MHz and CL11 — does that confirm the module is operating at its rated spec?

Exactly; a POST screen or BIOS read-out of 1600 MHz frequency and CL11 latency means the stick is running at its rated DDR3-1600 PC3-12800 specification.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.