Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green PCB DDR3 ECC registered DIMM module with black chips and gold contacts

A-Tech

A-Tech 4GB DDR3 1600 ECC Registered 1Rx8 Server RAM

SKU CH-C65T-0WY5R

4GB DDR3 1600MHz ECC registered 1Rx8 server DIMM compatible with Kingston KTH-PL316S8/4G, KVR16R11S8/4 and KVR16R11S8/4EF

  • Capacity4GB
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC registered design protects data integrity in servers
  • DDR3 1600 MHz speed delivers 12800 MB/s bandwidth
  • CL11 latency at 1.50 V ensures stable timing
  • 240-pin DIMM form factor fits standard server slots
  • 1Rx8 rank organisation optimises memory controller efficiency

Target Server Upgrade

This 4GB DDR3 1600 ECC Registered module targets administrators maintaining compatible server or workstation platforms that require registered DIMMs. It serves as a direct replacement for Kingston KTH-PL316S8/4G, KVR16R11S8/4 and KVR16R11S8/4EF part numbers.

4GB Registered Capacity

The single 4GB rank delivers 1600 MHz throughput at CL11 latency on 1.5V. Registered buffering and ECC protect data integrity in multi-module configurations. Capacity limits appear when workloads exceed the 4GB ceiling or when the platform demands higher-density modules.

Tested Module Reliability

Each unit undergoes quality-assurance testing before shipment to verify dependable operation in supported systems. The supplier backs the module with a lifetime warranty and provides US-based technical support for compatibility questions before and after installation.

Kohokohdat

  • ECC registered design protects data integrity in servers
  • DDR3 1600 MHz speed delivers 12800 MB/s bandwidth
  • CL11 latency at 1.50 V ensures stable timing
  • 240-pin DIMM form factor fits standard server slots
  • 1Rx8 rank organisation optimises memory controller efficiency

Tekniset tiedot

BrandA-Tech
Capacity4GB
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Kysymyksiä tästä tuotteesta

Will this DDR3 1600 registered ECC module work alongside my existing DDR3 1600 RDIMMs in the same server?

Mixing modules of the same DDR3 1600 speed, CL11 latency, 1.5V voltage, ECC and registered design is generally supported; the system will run all DIMMs at the lowest common speed and timing.

How can I confirm the module is running at DDR3 1600 with ECC active after installation?

Enter the BIOS or UEFI and verify the memory speed reads 1600 MT/s, the voltage shows 1.5V, and ECC status is reported as enabled or active.

What is included in the box and do I need to buy anything else to install it?

The box contains one 4GB 240-pin DDR3 DIMM; no cables, brackets or additional parts are required for installation in a compatible server or workstation.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.