Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 240-pin DDR3 UDIMM module with black chips

A-Tech

A-Tech 4GB DDR3 1866 ECC UDIMM 1Rx8 CL13 1.5V 240-pin Server Memory

SKU CH-PMPA-88Y6E

A 4 GB DDR3 1866 ECC UDIMM module with CL13 latency and 1.5 V operation for server upgrades

  • Capacity4GB
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ECC protection safeguards data integrity in servers
  • 1866 MHz DDR3 speed accelerates workload throughput
  • CL13 latency and 1.5V voltage balance performance with efficiency
  • 240-pin UDIMM form factor fits standard server slots
  • Lifetime warranty and US-based tech support back every module

A-Tech 4GB DDR3 1866 ECC UDIMM

This A-Tech module provides 4GB of DDR3 1866 server memory with ECC error correction for data integrity. It is built for servers and workstations that require unbuffered DIMMs running at standard 1.5V. The single-rank 1Rx8 design fits systems qualified for PC3-14900 CL13 specifications.

Thermals noise and power draw

Operating at the standard DDR3 voltage of 1.5V, the module draws typical power for its class without needing active cooling. Passive airflow in a server chassis is sufficient to maintain stable temperatures under normal workloads. The unbuffered design adds no extra electrical load on the memory controller.

Build quality connectors and mounting

The 240-pin DIMM form factor installs directly into standard DDR3 UDIMM slots on compatible server and workstation boards. Major-brand chips are used throughout and every unit undergoes quality-assurance testing for reliability. Buyers needing higher capacities or registered DIMM support should verify their platform requirements before ordering.

Kohokohdat

  • ECC protection safeguards data integrity in servers
  • 1866 MHz DDR3 speed accelerates workload throughput
  • CL13 latency and 1.5V voltage balance performance with efficiency
  • 240-pin UDIMM form factor fits standard server slots
  • Lifetime warranty and US-based tech support back every module

Tekniset tiedot

BrandA-Tech
Capacity4GB
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.50V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Kysymyksiä tästä tuotteesta

How do I install the 240-pin DDR3 ECC UDIMM and what step is often missed?

Power off the server, open the chassis, align the notch on the 240-pin module with the slot key, press firmly until both retention clips click, then verify in BIOS that ECC is enabled and the speed reads 1866 MHz.

What maintenance or replacement will this 4GB DDR3 module need over time?

No routine maintenance is required; keep air vents clear so the 1.5V modules stay cool, and replace only if memory diagnostics report uncorrectable ECC errors or the system fails to POST.

What limit appears first when this CL13 1866 MHz kit runs under sustained load?

The CAS latency of 13 cycles at 1866 MHz sets the timing floor; under heavy sustained workloads the memory controller hits that latency ceiling before thermal throttling becomes a factor.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.