Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green printed circuit board with black memory chips, no heat spreader, 240-pin DIMM edge connector

A-Tech

A-Tech 4GB DDR3 1866MHz CL13 1.5V Desktop RAM

SKU CH-3FRT-VV28T

A 4GB DDR3 1866MHz desktop DIMM with CL13 latency and 1.5V operation, tested as a compatible replacement for Corsair CMZ8GX3M2A1866C9 modules

  • Capacity4GB
  • SpeedDDR3 1866 (PC3 14900)
  • Tested Frequency1866
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCNo
  • 4GB capacity adds responsive multitasking headroom for everyday desktop workloads
  • DDR3 1866MHz speed delivers quick data throughput at PC3-14900 rating
  • CL13 CAS latency keeps access times tight for snappy application loading
  • 5V standard voltage ensures broad motherboard compatibility without extra configuration
  • 240-pin unbuffered DIMM fits straight into desktop slots for tool-free installation

4GB DDR3 1866MHz Desktop Memory

This A-Tech module is a 4GB DDR3 DIMM rated at 1866MHz with CL13 latency and 1.5V operation. It is built as an unbuffered, non-ECC stick using major-brand chips and ships without a heat spreader. The 240-pin form factor fits standard desktop memory slots.

Suits owners of Corsair CMZ8GX3M2A1866C9 kits

The module is tested as a direct replacement for Corsair part numbers CMZ8GX3M2A1866C9, CMZ8GX3M2A1866C9B and CMZ8GX3M2A1866C9R. Systems requiring registered memory, ECC functionality or a different pin count should consider other options. Buyers should confirm their motherboard supports DDR3 1866MHz before ordering.

CL13 CAS latency at 1.5V

The rated CAS latency of CL13 at the standard 1.5V DDR3 voltage determines whether the memory matches the timing requirements of the target system. This single figure governs compatibility with the original Corsair specification.

Kohokohdat

  • 4GB capacity adds responsive multitasking headroom for everyday desktop workloads
  • DDR3 1866MHz speed delivers quick data throughput at PC3-14900 rating
  • CL13 CAS latency keeps access times tight for snappy application loading
  • 5V standard voltage ensures broad motherboard compatibility without extra configuration
  • 240-pin unbuffered DIMM fits straight into desktop slots for tool-free installation

Tekniset tiedot

BrandA-Tech
SeriesCompatible Replacement for Corsair
ModelCMZ8GX3M2A1866C9, CMZ8GX3M2A1866C9B, CMZ8GX3M2A1866C9R
Capacity4GB
SpeedDDR3 1866 (PC3 14900)
Tested Frequency1866
CAS LatencyCL13
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesCMZ8GX3M2A1866C9, CMZ8GX3M2A1866C9B, CMZ8GX3M2A1866C9R
Recommend UseCompatible Replacement for Corsair CMZ8GX3M2A1866C9, CMZ8GX3M2A1866C9B, CMZ8GX3M2A1866C9R

Kysymyksiä tästä tuotteesta

Does the 240-pin DDR3 DIMM fit my desktop motherboard slot?

This module is a standard 240-pin DDR3 DIMM, the physical form factor used by desktop motherboards that support DDR3 memory.

What is the correct way to seat the module so the 1.5V contacts make full connection?

Align the notch on the module with the key in the slot, press down firmly until both side clips click into place, and verify the module sits evenly without tilting.

Will the lack of a heat spreader on this 1866MHz CL13 stick affect long-term reliability?

The module runs at standard 1.5V without a heat spreader; adequate case airflow is sufficient for normal desktop operation and long-term reliability.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.