BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.0027736BTC
Varastossa
A-Tech
A-Tech 4GB DDR3 1866MHz CL13 1.5V G.Skill F3-1866C9D-8GAB Desktop RAM
4GB DDR3 1866MHz CL13 1.5V 240-pin desktop memory module tested at 1866MHz for G.Skill F3-1866C9D-8GAB compatibility
- Capacity4GB
- SpeedDDR3 1866 (PC3 14900)
- Tested Frequency1866
- CAS LatencyCL13
- Voltage1.50V
- ECCNo
- 4GB DDR3 module expands desktop capacity for smoother multitasking
- 1866MHz PC3-14900 speed accelerates data throughput for responsive applications
- CL13 CAS latency reduces access delay for quicker command execution
- 5V standard DDR3 voltage ensures broad motherboard compatibility
- 240-pin DIMM form factor fits standard desktop memory slots
A-Tech 4GB DDR3 1866MHz CL13 Replacement
This module is a 4GB DDR3 DIMM rated at 1866MHz with CL13 latency and 1.5V operation. It serves as a compatible replacement for the G.Skill F3-1866C9D-8GAB part number. The unbuffered, non-ECC design targets standard desktop memory slots. Quality assurance testing is performed on each unit.
Suits DDR3 desktop upgrades.
The kit fits desktop motherboards that accept DDR3 1866MHz memory at 1.5V. Systems requiring ECC, registered modules, or a different voltage should look elsewhere. Laptops and small-form-factor boards using SODIMM sockets cannot use this 240-pin DIMM. Confirm the maximum supported frequency and slot count before ordering.
Deciding spec: DDR3 1866MHz CL13 1.5V 240-pin
The single specification that decides fit is the DDR3 1866MHz CL13 1.5V 240-pin DIMM interface. Your motherboard must support DDR3 at 1866MHz (PC3-14900) with 1.5V unbuffered non-ECC modules. If the board calls for a different speed, latency, voltage, or pin count, this module will not work.
Kohokohdat
- 4GB DDR3 module expands desktop capacity for smoother multitasking
- 1866MHz PC3-14900 speed accelerates data throughput for responsive applications
- CL13 CAS latency reduces access delay for quicker command execution
- 5V standard DDR3 voltage ensures broad motherboard compatibility
- 240-pin DIMM form factor fits standard desktop memory slots
Tekniset tiedot
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for G.Skill |
| Model | F3-1866C9D-8GAB |
| Capacity | 4GB |
| Speed | DDR3 1866 (PC3 14900) |
| Tested Frequency | 1866 |
| CAS Latency | CL13 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | F3-1866C9D-8GAB |
| Recommend Use | Compatible Replacement for G.Skill F3-1866C9D-8GAB |
Kysymyksiä tästä tuotteesta
Will this 240-pin DDR3 DIMM fit my motherboard slot?
The module uses the standard 240-pin DDR3 DIMM form factor; verify your board accepts DDR3 unbuffered memory before installing.
What BIOS setting is often missed when installing this 1866 MHz CL13 kit?
After seating the stick, enter BIOS and enable the XMP or DOCP profile so the memory runs at 1866 MHz with CAS latency 13 at 1.5 V instead of the default lower speed.
How do I know when this 4 GB stick should be replaced?
Run a memory test such as MemTest86; if errors appear or the system becomes unstable at the rated 1866 MHz CL13 1.5 V settings, the module has likely degraded and should be swapped.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
