Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 240-pin DDR3 DIMM with black chips and silver label

A-Tech

A-Tech 4GB DDR3 1866MHz ECC RDIMM 1Rx8 Server RAM

SKU CH-EHGG-AXCKY

A 4 GB DDR3 1866 MHz ECC registered DIMM with CL13 latency and 1.5 V operation for server upgrades

  • Capacity4GB
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection prevents data corruption in critical server workloads
  • Registered design reduces electrical load for stable multi-module operation
  • DDR3 1866MHz speed delivers PC3-14900 bandwidth for responsive performance
  • 1Rx8 single-rank layout simplifies memory controller scheduling
  • 5V standard voltage ensures broad DDR3 platform compatibility

4GB DDR3 1866MHz ECC RDIMM for servers

This 4GB registered DIMM runs at DDR3 1866MHz (PC3-14900) with CL13 latency and 1.50V operation. It uses a 1Rx8 organisation and major-brand chips on a 240-pin form factor. The module is built for server and workstation platforms that require ECC error correction and registered signalling.

Suits admins replacing Hynix HMT451R7AFR8C-RD

It fits systems that accept DDR3 1866MHz ECC RDIMM memory in single 4GB increments. Buyers needing higher capacities per slot, unbuffered ECC UDIMM modules, or non-ECC memory for desktop boards should look at something else.

Registered ECC RDIMM with 1Rx8 organisation

The registered buffer and ECC circuitry are mandatory for compatible server chipsets; a standard UDIMM will not function in these slots. Verify that your platform supports DDR3 1866MHz registered ECC before ordering.

Kohokohdat

  • ECC protection prevents data corruption in critical server workloads
  • Registered design reduces electrical load for stable multi-module operation
  • DDR3 1866MHz speed delivers PC3-14900 bandwidth for responsive performance
  • 1Rx8 single-rank layout simplifies memory controller scheduling
  • 5V standard voltage ensures broad DDR3 platform compatibility

Tekniset tiedot

BrandA-Tech
Capacity4GB
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Kysymyksiä tästä tuotteesta

How can I confirm the module is running at DDR3 1866MHz with CL13 after installation?

Enter the system BIOS or UEFI and check the memory information screen; it should show 1866 MHz speed and a CAS latency of 13 at 1.50V.

Does the package include any heatsinks, cables or additional modules beyond the single 4GB stick?

The box contains only one 4GB DDR3 240-pin ECC RDIMM module; no heatsinks, cables or extra sticks are included.

Should I choose the HMT451R7AFR8C-RD, HMT451R7BFR8C-RD or HMT451R7DFR8C-RD equivalent for my server?

All three Hynix part numbers share the same 4GB 1Rx8 DDR3 1866MHz ECC RDIMM specification, so this single module replaces any of them.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.