A-Tech
A-Tech 4GB DDR3L 1333MHz PC3L-10600 204-Pin SODIMM 1.35V Laptop RAM
A 4 GB DDR3L SODIMM running at 1333 MHz with CL9 latency and 1.35 V low-voltage operation for laptop upgrades
- Capacity4GB
- Type204-Pin DDR3 SO-DIMM
- SpeedDDR3L 1333 (PC3L 10600)
- CAS LatencyCL9
- Voltage1.35V
- ECCNo
- Boosts system responsiveness with 4 GB DDR3L 1333 MHz module
- Low 1.35 V operation cuts laptop power draw
- 204-pin SO-DIMM fits standard DDR3L laptop slots
- Tested for reliable performance in AMD and Intel platforms
- Direct replacement for Crucial CT51264BF1339 and CT4G3S1339M
4GB DDR3L SODIMM for laptop upgrade
This 204-pin module delivers 4GB of DDR3L memory at 1333MHz with CL9 latency. It runs at 1.35V and uses unbuffered, non-ECC chips. The stick is built as a direct replacement for Crucial CT51264BF1339, CT4G3S1339M, CT2KIT51264BF1339 and CT2K4G3S1339M modules.
Capacity and headroom for everyday loads
A single 4GB SO-DIMM suits web browsing, office suites and light multitasking on older DDR3L platforms. It will not satisfy modern gaming, video editing or virtual machines that demand 8GB or more. Systems limited to one slot cannot expand past this module.
Low-voltage thermals and power draw
The 1.35V DDR3L rating keeps heat output low inside thin laptop chassis. Unbuffered operation avoids the extra power draw of registered designs. Passive cooling in the notebook is normally sufficient for this module under typical workloads.
Kohokohdat
- Boosts system responsiveness with 4 GB DDR3L 1333 MHz module
- Low 1.35 V operation cuts laptop power draw
- 204-pin SO-DIMM fits standard DDR3L laptop slots
- Tested for reliable performance in AMD and Intel platforms
- Direct replacement for Crucial CT51264BF1339 and CT4G3S1339M
Tekniset tiedot
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3L 1333 (PC3L 10600) |
| CAS Latency | CL9 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Features | Major Brand Chips |
| Recommend Use | AMD & Intel Compatible |
Kysymyksiä tästä tuotteesta
Will this 204-pin DDR3L 1333 MHz module work in a laptop that currently uses 1.5 V DDR3 SODIMMs?
The module runs at 1.35 V and is a DDR3L part; it will operate in a 1.5 V DDR3 slot only if the platform supports low-voltage memory, otherwise the system may not boot.
How can I confirm the CL9 1.35 V stick is running at the rated 1333 MHz after installation?
Open Task Manager or a tool such as CPU-Z and check the memory tab; it should show 1333 MHz and CL9 timings when the module is detected correctly.
Does the single 4 GB stick ship with any installation hardware or only the SODIMM itself?
Only the 204-pin DDR3L SODIMM is included; no screws, tools or additional cables are supplied.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Shenzhen Junxiangcheng Technology Co., 24-Bay 6Gb/s miniSAS 4U Server Chassis
- Rackmount
- 4U
STARTECH 4PCIE-PCIE-ENCLOSURE server chassis
- Accessories
iStarUSA Inc. D-118V2-ITX-DT 1U server chassis 11" depth
- 1U
- Black



