Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 240-pin DDR3L RDIMM with black chips and gold contacts

A-Tech

A-Tech 4GB DDR3L 1333MHz PC3L-10600 ECC RDIMM 2Rx4 1.35V Server Memory

SKU CH-MKB8-W9T5Z

4GB DDR3L 1333MHz ECC registered DIMM with 2Rx4 organisation, 1.35V operation and major-brand chips for server upgrades

  • Capacity4GB
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection prevents data corruption in critical workloads
  • Registered design stabilises signal integrity on multi-module servers
  • Low-voltage 1.35 V operation reduces power draw and heat output
  • 1333 MHz DDR3L speed matches PC3L-10600 system requirements
  • Direct replacement for Micron MT36KSZF51272PZ-1G4F1 ensures drop-in compatibility

Server ECC RDIMM Module

This A-Tech module is a 4GB DDR3L registered DIMM built for servers and workstations that require error-correcting memory. It operates at 1333MHz with a CL9 latency and runs at the low 1.35V DDR3L voltage to reduce power draw in compatible platforms.

Compatibility and Use Cases

The module suits administrators upgrading or repairing systems that accept DDR3L 1333MHz PC3L-10600 ECC RDIMMs with a 2Rx4 organisation. It is not intended for desktop boards that only support unbuffered non-ECC memory or for platforms that require a different voltage, speed or form factor.

Deciding Specification

The registered ECC design combined with DDR3L 1.35V operation is the single specification that determines whether this part will function in a given server; the system must explicitly support registered error-correcting DDR3L DIMMs at this voltage.

Kohokohdat

  • ECC protection prevents data corruption in critical workloads
  • Registered design stabilises signal integrity on multi-module servers
  • Low-voltage 1.35 V operation reduces power draw and heat output
  • 1333 MHz DDR3L speed matches PC3L-10600 system requirements
  • Direct replacement for Micron MT36KSZF51272PZ-1G4F1 ensures drop-in compatibility

Tekniset tiedot

BrandA-Tech
Capacity4GB
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Kysymyksiä tästä tuotteesta

How much heat does the 1.35V DDR3L module generate under continuous server load?

The 1.35V DDR3L voltage reduces power draw compared to standard 1.5V DDR3, lowering heat output during all-day operation in registered DIMM configurations.

What motherboard slot and chipset support are required for this 240-pin ECC RDIMM?

A server or workstation motherboard with DDR3 240-pin registered DIMM slots and ECC support in the chipset is required; verify your system manual for qualified memory lists.

Can this CL9 1333MHz registered module run alongside existing CL9 1333MHz unbuffered DIMMs?

No — registered ECC RDIMMs and unbuffered DIMMs use different signalling and cannot be mixed in the same system; all slots must use registered modules.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.