Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green rectangular circuit board with gold edge connectors and black memory chips

A-Tech

A-Tech 4GB DDR3L 1600 CL11 1.35V 240-Pin 1Rx8 CT51264BD160BJ Desktop RAM

SKU CH-ZH97-16XAK

4GB DDR3L 1600 CL11 1.35V 240-pin unbuffered DIMM for desktop upgrades

  • Capacity4GB
  • SpeedDDR3L 1600 (PC3L 12800)
  • Tested Frequency1600
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCNo
  • Boosts multitasking with a 4GB DDR3L module
  • Runs at 1600MHz speed with CL11 latency for responsive performance
  • Operates at 1.35V low voltage for efficient power use
  • Fits standard desktops with 240-pin DIMM DDR3 form factor
  • Tested for reliable compatibility as Crucial CT51264BD160BJ replacement

A-Tech 4GB DDR3L 1600 Desktop Module

This A-Tech module provides 4GB of DDR3L memory at 1600 MHz with a CAS latency of CL11. It uses a 240-pin DIMM form factor and operates at 1.35V. The unbuffered, non-ECC design relies on major brand chips for desktop system upgrades.

Suitable for DDR3L low-voltage desktop slots

Builders upgrading a desktop that accepts DDR3L 1600 unbuffered DIMMs can use this module. Systems requiring ECC registered memory, SO-DIMM laptop form factors, or a different DDR generation will not accept this part. Verify your motherboard specifications before purchasing.

1.35V DDR3L voltage requirement

The decisive specification is the 1.35V operating voltage that defines the DDR3L standard. A motherboard must support this low-voltage level for the module to function correctly. Check your system documentation to confirm DDR3L compatibility before ordering.

Kohokohdat

  • Boosts multitasking with a 4GB DDR3L module
  • Runs at 1600MHz speed with CL11 latency for responsive performance
  • Operates at 1.35V low voltage for efficient power use
  • Fits standard desktops with 240-pin DIMM DDR3 form factor
  • Tested for reliable compatibility as Crucial CT51264BD160BJ replacement

Tekniset tiedot

BrandA-Tech
Capacity4GB
SpeedDDR3L 1600 (PC3L 12800)
Tested Frequency1600
CAS LatencyCL11
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chips
FeaturesMajor Brand Chipset
Recommend UseAMD & Intel Compatible

Kysymyksiä tästä tuotteesta

Does my desktop motherboard need a 240-pin DDR3 slot to accept this module?

Yes, the module uses a 240-pin DIMM form factor and requires a DDR3 or DDR3L slot on the motherboard.

Will this 1.35V DDR3L stick run reliably in a system that currently uses 1.5V DDR3 memory?

The module operates at 1.35V and is designed to be compatible with both DDR3 and DDR3L platforms; the memory controller will set the appropriate voltage.

After installation, how can I confirm the RAM is running at the rated 1600 speed with CL11 timing?

Check the memory frequency and CAS latency in the BIOS or with a system information tool; they should report 1600 MHz and CL11.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.