Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 240-pin DDR3L UDIMM module with black chips and gold contacts

A-Tech

A-Tech 4GB DDR3L 1600 CL11 ECC UDIMM 1.35V Supermicro Certified

SKU CH-MJB4-1B3DX

4GB DDR3L 1600 CL11 ECC UDIMM at 1.35V, Supermicro certified for server compatibility

  • Capacity4GB
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • Supermicro certified for guaranteed server compatibility
  • DDR3L 1.35 V cuts power draw versus standard DDR3
  • ECC unbuffered design detects and corrects single-bit errors
  • 1600 MHz CL11 timing delivers responsive throughput
  • 240-pin UDIMM fits compatible Supermicro platforms

A-Tech 4GB DDR3L 1600 ECC UDIMM

This 4GB DDR3L module runs at 1600MHz with CL11 latency and 1.35V low-voltage operation. It uses Hynix chips in a 1Rx8 single-rank layout and carries Supermicro certification. The unbuffered ECC design targets servers and workstations that require error correction without registered signalling.

Check DDR3L 1.35V support and 240-pin UDIMM slots

Verify that your motherboard accepts DDR3L memory at 1.35V rather than standard 1.5V DDR3. Confirm the board provides unbuffered ECC UDIMM slots with 240-pin keying and supports PC3L-12800 speed. Single-rank 1Rx8 organisation must be compatible with your system's memory controller for proper operation.

Steady ECC correction during continuous workloads

Error-correcting code operates on every cycle, detecting and correcting single-bit errors while flagging multi-bit faults without pausing the pipeline. Low-voltage DDR3L reduces power draw and heat during sustained throughput, helping maintain signal integrity. Supermicro certification confirms the module passes extended validation for 24/7 server duty.

Kohokohdat

  • Supermicro certified for guaranteed server compatibility
  • DDR3L 1.35 V cuts power draw versus standard DDR3
  • ECC unbuffered design detects and corrects single-bit errors
  • 1600 MHz CL11 timing delivers responsive throughput
  • 240-pin UDIMM fits compatible Supermicro platforms

Tekniset tiedot

BrandSuperMicro
SeriesSupermicro Certified
ModelMEM-DR340L-HL05-EU16
Capacity4GB
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor Brand Chipset
FeaturesSupermicro Certified MEM-DR340L-HL05-EU16 (Hynix)

Kysymyksiä tästä tuotteesta

Does the 4GB DDR3L 1600 CL11 ECC UDIMM come as a single stick or a kit, and is anything else needed to install it?

The module is sold as a single 4GB stick (1Rx8, 240-pin); no extra parts are required beyond a compatible DDR3L UDIMM slot.

Should I choose the 1.35V DDR3L 1600 CL11 version or a different voltage or speed for my Supermicro system?

Select this exact 1.35V DDR3L 1600 CL11 module when your Supermicro platform specifies PC3L-12800 ECC unbuffered memory; other voltages or speeds will not match the certified part number.

What does the 1600MHz rating mean once the MEM-DR340L-HL05-EU16 is installed in a server?

The memory runs at 1600MHz with CL11 timing at 1.35V, delivering the certified DDR3L 1600 ECC unbuffered performance validated for Supermicro systems.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.