Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 240-pin DDR3L UDIMM module with black Samsung chips, 4GB 1Rx8 ECC unbuffered server memory

A-Tech

A-Tech 4GB DDR3L 1600 ECC UDIMM 1Rx8 Server RAM

SKU CH-GNCP-T7PF5

A 4 GB DDR3L 1600 ECC UDIMM module with 1.35 V operation and CL11 latency for server upgrades

  • Capacity4GB
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • 4GB DDR3L 1600MHz capacity expands server memory for heavier workloads
  • 35V low-voltage DDR3L reduces power draw and heat in dense racks
  • ECC unbuffered design detects and corrects single-bit errors for data integrity
  • 1Rx8 single-rank organisation keeps signal loading light on memory controllers
  • 240-pin DDR3 DIMM form factor fits standard server memory slots

What this module is

A 4GB DDR3L ECC unbuffered DIMM rated at 1600MHz with CL11 latency. It runs at 1.35V low voltage and uses a single-rank 1Rx8 Samsung chipset. Designed for servers and workstations that require error-correcting memory in a standard 240-pin DDR3 slot.

Installation and common issues

The module inserts into a regular DDR3 DIMM socket and needs no special tools. Ensure the notch aligns with the key on the slot before pressing firmly until the retention clips click. Common problems include mixing voltages or using registered DIMMs in boards that only accept unbuffered modules.

Check before ordering

Verify that your system supports DDR3L at 1.35V and accepts unbuffered ECC UDIMMs. Confirm the motherboard or server manual lists 1Rx8 single-rank modules as compatible. Check the maximum memory per slot and total capacity allowed for your specific platform.

Kohokohdat

  • 4GB DDR3L 1600MHz capacity expands server memory for heavier workloads
  • 35V low-voltage DDR3L reduces power draw and heat in dense racks
  • ECC unbuffered design detects and corrects single-bit errors for data integrity
  • 1Rx8 single-rank organisation keeps signal loading light on memory controllers
  • 240-pin DDR3 DIMM form factor fits standard server memory slots

Tekniset tiedot

BrandA-Tech
SeriesCompatible Replacement for Samsung
ModelM391B5173BH0-YK0
Capacity4GB
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetSamsung Chipset
FeaturesM391B5173BH0-YK0

Kysymyksiä tästä tuotteesta

How can I verify the 4GB DDR3L 1600 ECC UDIMM is running at 1.35V and CL11 after installation?

Enter the system BIOS or use a tool like CPU-Z to confirm the module reports 1600 MHz speed, 1.35V voltage, CL11 latency, and ECC unbuffered status.

What is included with the A-Tech 4GB DDR3L 1600 module and what else is needed?

The box contains one 4GB 240-pin DDR3L UDIMM. No cables or extra parts are required; ensure your server or workstation has a free DDR3 DIMM slot.

Should I choose this 4GB 1Rx8 DDR3L 1600 ECC UDIMM or a different capacity?

Select this 4GB 1Rx8 module if your system needs a single low-voltage ECC unbuffered DIMM at 1600 MHz; add multiple identical units to reach the total memory your board supports.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.