NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
A 4 GB DDR3L SODIMM running at 1600 MHz with CL11 latency and 1.35 V operation for compatible HP laptops
This 4GB module is a compatible replacement for HP part H6Y75AA#ABA. It suits laptops, notebooks and all-in-one systems that require a single DDR3L SODIMM upgrade. Buyers who need larger capacities or multiple modules for dual-channel configurations should look elsewhere.
The memory runs at 1600 MHz with a PC3L-12800 rating and operates at 1.35 V. It uses a 204-pin SO-DIMM form factor with CL11 latency. Systems that only accept 1.5 V DDR3 or require ECC and registered modules will not work with this stick.
Verify that your device supports DDR3L SO-DIMM memory at 1.35 V and accepts unbuffered, non-ECC modules. Confirm the maximum supported speed and total capacity allowed by the manufacturer. Ensure a free 204-pin slot is available for installation.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for HP |
| Model | H6Y75AA#ABA |
| Capacity | 4GB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | H6Y75AA#ABA |
| Recommend Use | Compatible Replacement for HP H6Y75AA#ABA |
This listing is a single 4 GB DDR3L 1600 SODIMM. If your laptop has two slots and supports 8 GB total, adding a second identical module will give you dual-channel bandwidth.
The module runs at 1600 MHz with CL11 timing at 1.35 V. Your system will operate it at the highest speed the memory controller allows, which may be 1600 MHz or a lower supported frequency.
Yes. The stick is a 204-pin DDR3L SODIMM keyed for DDR3 slots. It runs at the standard 1.35 V low voltage and is backward compatible with 1.5 V DDR3 controllers.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?