Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 288-pin DDR4 DIMM with black memory chips and gold edge contacts

A-Tech

A-Tech 4GB DDR4 2400 ECC RDIMM 1Rx8 Server Memory

SKU CH-VY50-G9SAA

4GB DDR4 2400MHz ECC registered server DIMM with CL17 latency and 1.2V operation

  • Capacity4GB
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection guards data integrity in server workloads
  • DDR4 2400MHz CL17 speed supports responsive multitasking
  • Registered 1Rx8 design stabilises signal for dense configurations
  • 2V operation matches DDR4 standard voltage
  • 288-pin DIMM form factor fits compatible server slots

4GB DDR4 2400 ECC RDIMM

This 4GB DDR4 2400 registered DIMM adds error-correcting memory to compatible servers and workstations. It suits administrators who need to expand capacity on platforms that require registered modules with ECC support. The module runs at 1.20V and carries a CL17 latency rating.

288-pin registered form factor

The stick uses a 288-pin DDR4 DIMM interface and presents a 1Rx8 organisation to the memory controller. Registered buffering reduces electrical load on the motherboard, freeing the platform to populate more slots without signal degradation. Verify that your system specifies DDR4 RDIMM support before installation.

Sustained ECC operation

Error-correcting code runs continuously during workloads, detecting and correcting single-bit errors without halting the system. Registered buffering maintains signal integrity across extended sessions, while the 1.20V standard voltage keeps power draw predictable under constant load. Quality testing validates reliable performance over time.

Kohokohdat

  • ECC protection guards data integrity in server workloads
  • DDR4 2400MHz CL17 speed supports responsive multitasking
  • Registered 1Rx8 design stabilises signal for dense configurations
  • 2V operation matches DDR4 standard voltage
  • 288-pin DIMM form factor fits compatible server slots

Tekniset tiedot

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMTA9ASF51272PZ-2G3A2MG, MTA9ASF51272PZ-2G3B1II
Capacity4GB
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMicron Chipset
FeaturesMTA9ASF51272PZ-2G3A2MG, MTA9ASF51272PZ-2G3B1II

Kysymyksiä tästä tuotteesta

How does the CL17 latency affect sustained throughput on this DDR4 2400 module?

The CL17 timing at 2400 MHz sets the baseline access delay; under sustained loads the registered buffer adds one cycle, so real-world bandwidth settles near the PC4-19200 rating.

What thermal or power behaviour should I expect when this 1.20 V ECC RDIMM runs continuously in a populated server chassis?

At 1.20 V the module stays within standard DDR4 power limits; the registered design shifts electrical load to the buffer chip, keeping DIMM temperatures low even during all-day workloads.

Which motherboard slot and chipset combination is required for this 288-pin 1Rx8 registered DIMM to function?

A DDR4 RDIMM slot with a server-class chipset that supports ECC and registered memory is required; consumer boards without registered-DIMM support will not post with this module.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.