Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 288-pin DDR4 UDIMM with black memory chips

A-Tech

A-Tech 4GB DDR4 2400 ECC UDIMM 1Rx8 Server Memory

SKU CH-X27G-GNCJN

4GB DDR4 2400 ECC UDIMM module with 1Rx8 rank, CL17 latency and 1.20V operation for server and workstation upgrades

  • Capacity4GB
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • 4GB capacity expands server multitasking headroom
  • DDR4 2400 speed accelerates data throughput
  • ECC UDIMM protects critical workloads from errors
  • 20V operation matches standard DDR4 voltage
  • 288-pin DIMM fits compatible server motherboards

Server Memory for ECC Workstations

This A-Tech module delivers 4GB of DDR4 2400 ECC UDIMM memory designed for server and workstation systems. It operates at CL17 latency with a standard 1.20V voltage. The unbuffered design suits platforms that require error-correcting code without registered signalling. It serves as a direct replacement for the Hynix HMA451U7AFR8N-UH part.

288-Pin UDIMM Integration

The stick fits a standard 288-pin DDR4 DIMM slot and requires a motherboard that supports ECC UDIMM operation at 2400 MT/s. Because it is unbuffered, it does not add the electrical load of registered modules, leaving the memory controller free for other ranks. Builders must confirm their platform accepts ECC unbuffered memory before installation.

Sustained Load Stability

Major-brand chips and factory testing target reliable operation during continuous workloads such as virtualization or file serving. ECC circuitry corrects single-bit errors on the fly, preventing data corruption over long uptimes. The 1.20V standard voltage keeps power draw consistent under load. Systems without ECC support cannot use the error-correction capability.

Kohokohdat

  • 4GB capacity expands server multitasking headroom
  • DDR4 2400 speed accelerates data throughput
  • ECC UDIMM protects critical workloads from errors
  • 20V operation matches standard DDR4 voltage
  • 288-pin DIMM fits compatible server motherboards

Tekniset tiedot

BrandA-Tech
Capacity4GB
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Kysymyksiä tästä tuotteesta

Does the CL17 latency limit throughput when the module runs at 2400 MHz for long periods?

CL17 is the rated timing at DDR4 2400; sustained workloads stay within that specification.

How much heat or power does the 1.20 V unbuffered ECC DIMM produce during all-day operation?

At the standard 1.20 V DDR4 voltage the module runs cool and draws minimal power for continuous server use.

Which motherboard slot and chipset support are required for this 288-pin DDR4 ECC UDIMM?

A DDR4 288-pin UDIMM slot with ECC support in the platform chipset is needed for the module to function.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.