A-Tech 32GB DDR4 3200 ECC RDIMM 2Rx4 288-Pin Server RAM
- 32GB
- DDR4 3200 (PC4 2560…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
A 64 GB dual-channel kit of two 32 GB DDR4 2666 ECC load-reduced DIMMs with 2Rx4 organisation and CL19 latency for servers and workstations
Capacity 64GB (2 x 32GB)
This 64GB kit contains two 32GB DDR4 2666 MHz ECC Load Reduced DIMMs. Each module uses a 2Rx4 organisation and runs at 1.20V with CL19 latency. The 288-pin form factor is built for server and workstation platforms that require registered memory.
Suitable for administrators upgrading compatible DDR4 servers or workstations that specifically support LRDIMM technology. Not for desktop or laptop systems, which cannot use Load Reduced modules. Buyers who need unbuffered ECC or standard registered DIMMs should look at a different memory type.
The decisive specification is the Load Reduced ECC design combined with a 2Rx4 rank structure at DDR4 2666 speed. Only systems qualified for DDR4 ECC LRDIMM modules can accept this kit; all other platforms will reject it.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 Server Memory RAM |
| Model | A-Tech 32GB 2Rx4 PC4-2666V-L |
| Capacity | 64GB (2 x 32GB) |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 2Rx4 (2DRx4) |
| Multi-channel Kit | Dual Channel Kit |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The kit uses standard DDR4 DIMM slots with 288 pins; the motherboard must support DDR4 ECC Load Reduced memory in the same form factor.
Align the module notch with the slot key, press straight down until both side latches click fully into the retention notches on each 32 GB stick.
Keep server airflow clean so the modules stay within thermal limits; ECC corrects single-bit errors automatically, and no scheduled replacement is required unless a module fails.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?