Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

A-Tech

A-Tech 64GB (4x16GB) DDR4 2400 ECC RDIMM 1Rx4 CL17 1.2V server RAM

SKU CH-KR9S-WD436

A 64 GB quad-channel kit of four 16 GB DDR4 2400 ECC registered DIMMs with CL17 latency and 1.2 V operation for servers and workstations

  • Capacity64GB (4 x 16GB)
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 64GB (4 x 16GB)

  • 64 GB kit expands server capacity for heavy workloads
  • ECC registered design protects data integrity in critical applications
  • DDR4 2400 MHz speed accelerates throughput for demanding tasks
  • Single-rank x4 modules optimise channel efficiency across four slots
  • 2 V standard voltage reduces power draw per module

Server DDR4 RDIMM kit

This 64GB kit contains four 16GB DDR4 2400 ECC registered DIMMs built for servers and workstations that require registered memory. Each module runs at CL17 latency and 1.2V standard voltage using single-rank x4 organisation. The 288-pin form factor fits only platforms designed for DDR4 RDIMM memory.

Registered ECC 288-pin design

Registered buffering and ECC error correction work together to maintain data integrity under sustained workloads in multi-socket systems. The quad-channel kit populates four slots simultaneously, so the memory controller can interleave traffic across all modules. Single-rank x4 chips keep electrical loading low per channel, helping stability when all slots are filled.

Upgrade from smaller RDIMM sets

Adding this kit replaces lower-capacity registered kits or mixed-rank modules to give a matched quad-channel population. The jump is worthwhile when your workload exceeds the current memory ceiling and the platform supports DDR4 2400 registered DIMMs. Desktop and laptop systems cannot use these modules.

Kohokohdat

  • 64 GB kit expands server capacity for heavy workloads
  • ECC registered design protects data integrity in critical applications
  • DDR4 2400 MHz speed accelerates throughput for demanding tasks
  • Single-rank x4 modules optimise channel efficiency across four slots
  • 2 V standard voltage reduces power draw per module

Tekniset tiedot

BrandA-Tech
SeriesA-Tech DDR4 Server Memory RAM
ModelA-Tech 16GB 1Rx4 PC4-2400T-R
Capacity64GB (4 x 16GB)
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Multi-channel KitQuad Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Does this DDR4 2400 (PC4-19200) kit run at the rated speed on any server board that lists DDR4 2400 support?

Speed will follow the highest JEDEC DDR4 2400 profile the platform enables; some systems may default to a lower data rate until the correct memory mode is selected in firmware.

What physical slot and keying do these 288-pin RDIMMs require?

They fit standard DDR4 RDIMM sockets with the registered DIMM key notch; desktop UDIMM or SO-DIMM slots will not accept them.

What is the correct way to populate the four modules for quad-channel operation?

Install one module per channel following the motherboard's population sequence (for example CPU1 slots A1, B1, C1, D1) so each channel receives a single 1Rx4 rank.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.