Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green rectangular DDR4 288-pin server DIMM module with black chips and gold contacts

A-Tech

A-Tech 64GB DDR4 2133 ECC LRDIMM 4Rx4 server RAM

SKU CH-K8XP-51CK4

64 GB DDR4 2133 ECC LRDIMM module with 4Rx4 organisation and 1.2 V operation for HP 839051-001 servers

  • Capacity64GB
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredLoad Reduced
  • 64 GB capacity lets servers handle larger workloads
  • DDR4 2133 MHz speed supports fast data throughput
  • ECC LRDIMM design reduces electrical load for stability
  • CL15 latency with 1.20 V voltage balances performance and efficiency
  • 288-pin DIMM form factor fits compatible DDR4 server slots

64GB DDR4 2133 ECC LRDIMM

This 64GB DDR4 2133 ECC LRDIMM module targets server and workstation operators who need maximum capacity per slot. The 4Rx4 load-reduced design allows dense memory configurations on platforms that support LRDIMM architecture. It replaces HP part 839051-001 for compatible systems.

Upgrade path from lower-capacity RDIMMs

The jump is worthwhile when your workload exceeds the rank or capacity limits of standard registered DIMMs and your motherboard qualifies LRDIMM at 2133 MT/s. If the platform only accepts RDIMM or caps speed below 2133, this module will not provide the expected benefit.

288-pin DIMM installation

Installation follows standard DIMM alignment; the 288-pin keying prevents incorrect insertion. The common issue is mixing LRDIMM with RDIMM in the same channel or populating slots in an order the firmware does not support, which leads to a no-post condition.

Kohokohdat

  • 64 GB capacity lets servers handle larger workloads
  • DDR4 2133 MHz speed supports fast data throughput
  • ECC LRDIMM design reduces electrical load for stability
  • CL15 latency with 1.20 V voltage balances performance and efficiency
  • 288-pin DIMM form factor fits compatible DDR4 server slots

Tekniset tiedot

BrandA-Tech
SeriesCompatible Replacement for HP
Model839051-001
Capacity64GB
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredLoad Reduced
Rank4Rx4
ChipsetMajor Brand Chipset
Features839051-001

Kysymyksiä tästä tuotteesta

Will the 288-pin DIMM fit my server's memory slots?

This module uses the standard DDR4 288-pin DIMM form factor. Verify your system accepts DDR4 LRDIMMs before purchase.

Do I need to configure anything in BIOS after installing this 4Rx4 LRDIMM?

Install the module with the system powered off. Most servers detect DDR4 2133 ECC LRDIMM automatically; check the memory configuration screen to confirm 64 GB at 2133 MHz.

When should this 64 GB ECC module be replaced?

Replace the module if the system logs uncorrectable ECC errors, corrected-error thresholds are exceeded, or the DIMM fails to initialise during POST.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.