Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

A-Tech

A-Tech 64GB DDR4 2933 ECC LRDIMM 4Rx4 288-Pin 1.2V CL21 Server RAM

SKU CH-XN9A-8219H

A 64 GB DDR4 2933 ECC load-reduced DIMM with quad-rank x4 organisation, CL21 timing and 1.2 V operation for server and workstation memory expansion

  • Capacity64GB
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredLoad Reduced
  • 64 GB capacity handles larger workloads and more virtual machines
  • DDR4 2933 MHz speed accelerates data throughput for demanding applications
  • ECC Load Reduced DIMM corrects errors and reduces electrical load on the memory bus
  • Quad Rank x4 organisation maximises density within a single 288-pin module
  • 2 V standard voltage lowers power draw while maintaining server stability

Target Platform

This 64 GB DDR4 module is built for servers and workstations that require ECC load-reduced memory. It will not function in desktop or laptop systems. Buyers who need standard unbuffered DIMMs or non-ECC memory for consumer platforms cannot use this product.

Installation Notes

The 288-pin DIMM seats like any DDR4 module, but the quad-rank 4Rx4 organisation means each slot presents a heavier electrical load. Systems with strict rank-per-channel limits may not accept a full complement of these modules. Always consult the platform manual for population rules and channel guidelines before installing.

Capacity and Headroom

A single 64 GB stick running at 2933 MHz with CL21 latency at 1.2 V provides substantial memory headroom for virtualisation, large databases and compute-intensive workloads. Workloads that exceed the module count supported by the memory controller will require a platform with more channels or higher-density modules.

Kohokohdat

  • 64 GB capacity handles larger workloads and more virtual machines
  • DDR4 2933 MHz speed accelerates data throughput for demanding applications
  • ECC Load Reduced DIMM corrects errors and reduces electrical load on the memory bus
  • Quad Rank x4 organisation maximises density within a single 288-pin module
  • 2 V standard voltage lowers power draw while maintaining server stability

Tekniset tiedot

BrandA-Tech
SeriesA-Tech DDR4 Server Memory RAM
ModelA-Tech 64GB 4Rx4 PC4-2933Y-L
Capacity64GB
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredLoad Reduced
Rank4Rx4 (4DRx4)
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How can I verify the module is running at 2933 MHz and CL21 after installation?

Enter the server BIOS or use a hardware monitoring tool; the memory should report DDR4-2933 speed and CAS latency 21 at 1.20 V.

What comes with the 64 GB module and is anything else required?

The box contains one 288-pin LRDIMM; no extra parts are needed if your server supports DDR4 ECC load-reduced memory.

Should I choose the 4Rx4 version or a different rank for my server?

Select this 4Rx4 module only when your system's qualified-vendor list specifies quad-rank x4 LRDIMMs; other ranks will not be compatible.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.