Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green rectangular circuit board with gold edge connectors and black memory chips on both sides

A-Tech

A-Tech 64GB DDR4 2933 ECC RDIMM 2Rx4 for Kingston KCS-UC429/64G Server Memory

SKU CH-F1PG-SGYKQ

A 64 GB DDR4 2933 ECC registered DIMM with 2Rx4 organisation and CL21 latency for compatible Kingston server platforms

  • Capacity64GB
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 64GB capacity handles large server workloads
  • DDR4 2933MHz speed accelerates data-intensive applications
  • ECC RDIMM technology protects against data corruption
  • 2Rx4 dual-rank design optimises memory density
  • 2V standard voltage reduces power consumption

64GB DDR4 2933 ECC RDIMM for Servers

This 64GB registered DIMM runs at DDR4 2933 (PC4-23400) with ECC error correction. It is built for server and workstation platforms that require registered memory and single-module capacity upgrades.

Sustained Workload Stability

The 1.20V operating voltage and CL21 latency support steady throughput during long compute jobs and virtualization tasks. ECC protection corrects single-bit errors on the fly, reducing silent data corruption under continuous load.

Verify Platform Compatibility First

Confirm your motherboard accepts 288-pin DDR4 RDIMM modules with 2Rx4 organisation at this speed. Systems limited to unbuffered UDIMM or lower maximum density per slot will not support this module.

Kohokohdat

  • 64GB capacity handles large server workloads
  • DDR4 2933MHz speed accelerates data-intensive applications
  • ECC RDIMM technology protects against data corruption
  • 2Rx4 dual-rank design optimises memory density
  • 2V standard voltage reduces power consumption

Tekniset tiedot

BrandA-Tech
Capacity64GB
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Kysymyksiä tästä tuotteesta

How much heat and power does a 64GB DDR4 2933 CL21 1.20V ECC RDIMM produce when running continuously?

The module operates at standard DDR4 1.20V with CL21 timings; registered ECC RDIMMs of this density typically draw a few watts each and run cool enough for normal server airflow, but exact thermal output depends on your chassis and workload.

What motherboard slot and memory controller features are required for this 288-pin 2Rx4 registered ECC module to function?

You need a DDR4 RDIMM slot with a memory controller that supports ECC and registered DIMMs; the 288-pin form factor fits standard DDR4 server sockets, but the platform must explicitly enable ECC and registered operation.

Will this PC4-23400 2Rx4 module run alongside slower DDR4 ECC RDIMMs I already have?

If your platform supports mixed-rank and mixed-speed registered ECC DIMMs, the system will clock all modules to the lowest common speed and apply the loosest timings; 2Rx4 organisation is compatible with other ranks but population rules vary by motherboard.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.