Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green DDR5 ECC RDIMM module with black chips and gold contacts

A-Tech

A-Tech 64GB DDR5 5600 ECC RDIMM 2Rx4 Micron MTC40F2046S1RC56BD1 Server Memory

SKU CH-DAXQ-XWA58

64 GB DDR5 5600 ECC registered server module with 2Rx4 Micron chips at 1.1 V

  • Capacity64GB
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 64 GB capacity expands server memory headroom
  • DDR5 5600 speed delivers high bandwidth for demanding workloads
  • ECC registered design corrects errors to protect data integrity
  • 10 V operation matches DDR5 standard for efficient power use
  • 2Rx4 organisation with Micron chipset ensures reliable module performance

A-Tech 64GB DDR5 5600 ECC RDIMM

This A-Tech module is a 64GB DDR5 5600 registered DIMM with ECC and a Micron chipset. It runs at 1.10V with CL40 latency and a 2Rx4 organisation. The part is built as a compatible replacement for the Micron MTC40F2046S1RC56BD1 and is intended for server and workstation platforms that require registered error-correcting memory.

Suits servers needing registered ECC DDR5

This module fits systems that accept a 288-pin DDR5 RDIMM with ECC and a 2Rx4 rank structure. Builders whose motherboards only support unbuffered UDIMMs or that cannot address a 64GB registered module should look at something else. The 1.10V operating voltage matches the DDR5 baseline, so platforms with different voltage requirements are not compatible.

288-pin DDR5 RDIMM form factor decides fit

The single specification that determines whether this part works is the 288-pin DDR5 registered DIMM form factor combined with ECC and a 2Rx4 layout. If the system’s memory slots and chipset require this exact combination, the module will install and function; if the platform expects a different pin count, buffering type or rank configuration, it will not.

Kohokohdat

  • 64 GB capacity expands server memory headroom
  • DDR5 5600 speed delivers high bandwidth for demanding workloads
  • ECC registered design corrects errors to protect data integrity
  • 10 V operation matches DDR5 standard for efficient power use
  • 2Rx4 organisation with Micron chipset ensures reliable module performance

Tekniset tiedot

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMTC40F2046S1RC56BD1
Capacity64GB
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4 (EC8)
ChipsetMicron Chipset
FeaturesMTC40F2046S1RC56BD1

Kysymyksiä tästä tuotteesta

Does the 64GB DDR5 5600 module ship as a single 288-pin DIMM or must I buy additional sticks?

The listing describes a single 64GB module (1 x 64GB) in a 288-pin DDR5 DIMM form factor, so one stick arrives ready to install.

Should I choose the CL40 1.10V 2Rx4 variant or a different latency or rank for my server?

This unit is specified at CL40, 1.10V and 2Rx4 organisation; select it when your platform requires that exact latency, voltage and rank configuration.

What does the PC5-44800 rating deliver once the RDIMM is seated in a live system?

PC5-44800 indicates a peak transfer rate of 44800 MB/s at 5600 MT/s, giving the registered ECC module its rated bandwidth in compatible server or workstation boards.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.