A-Tech 8GB (2x4GB) DDR3 1333 ECC UDIMM 2Rx8 1.5V Server RAM
- 8GB (2 x 4GB)
- DDR3 1333 (PC3 1060…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
An 8 GB dual-channel DDR4 kit with ECC registered DIMMs at 2400 MHz for servers and workstations
Capacity 8GB (2 x 4GB)
This 8GB dual-channel kit contains two 4GB registered DIMMs built for DDR4 servers and workstations. The modules run at 2400 MHz with CL17 latency and 1.20V operation. Error-correcting code and registered buffering protect data integrity in multi-socket platforms. Single-rank x8 organisation keeps electrical loading low on populated channels.
Your motherboard must accept 288-pin DDR4 registered ECC modules at 2400 MHz. Desktop and laptop boards cannot use this memory. Check the system manual for maximum capacity per slot and approved population rules. Mixing registered and unbuffered DIMMs will prevent boot.
Two single-rank modules populate a dual-channel pair without adding a second rank per channel. The 1.20V standard voltage works with common server power budgets. No heat spreader means standard airflow is sufficient. Registered signalling reduces load on the memory controller, freeing headroom for additional DIMMs in larger configurations.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 Server Memory RAM |
| Model | A-Tech 4GB 1Rx8 PC4-2400T-R |
| Part Number | AT4G2D4D2400RS8N12V |
| Capacity | 8GB (2 x 4GB) |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Multi-channel Kit | Dual Channel Kit |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | Major Brand Chips / Error Correcting Technology for Server Systems |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The box contains two 4 GB DDR4 ECC registered DIMMs. No extra components are required if your server or workstation has free 288-pin DDR4 slots and supports ECC RDIMM memory.
This kit is a single 8 GB dual-channel option (2 x 4 GB, 1Rx8, CL17, 1.20 V). Select it when your system requires registered ECC DDR4 2400 modules in a matched pair.
The modules run at DDR4 2400 speed with CL17 latency at 1.20 V, delivering the rated throughput when the platform's memory controller is configured for that frequency.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?