Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green rectangular 240-pin DDR3 DIMM with black memory chips and gold edge connectors

A-Tech

A-Tech 8GB DDR3 1066 ECC RDIMM 2Rx4 server RAM

SKU CH-F68S-R54WV

An 8 GB DDR3 1066 ECC registered DIMM with 2Rx4 organisation and CL7 latency for server memory upgrades

  • Capacity8GB
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL7
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection prevents data errors with registered DDR3 design
  • 1066 MHz speed handles server workloads at PC3-8500 bandwidth
  • 8 GB capacity in a single 240-pin module fits Dell part numbers
  • 2Rx4 rank organisation uses major-brand chips for reliable operation
  • 5 V standard voltage matches DDR3 platform requirements

8GB DDR3 1066 ECC Registered DIMM

This 8GB DDR3 module runs at 1066 MHz (PC3-8500) with CL7 latency and 1.5 V operation. It uses a registered 2Rx4 layout and major-brand chips to provide error-correcting memory for compatible Dell servers and workstations. The 240-pin form factor matches standard DDR3 DIMM slots in those platforms.

Suited for Dell servers needing registered ECC DDR3

Buyers replacing or expanding memory in systems that accept the listed Dell part numbers will find this module a direct fit. It is not suitable for platforms that require unbuffered UDIMMs, load-reduced DIMMs, or a different DDR generation, so verify the motherboard specification before ordering.

Registered ECC 2Rx4 organisation decides fit

The module is built as a dual-rank 2Rx4 registered ECC DIMM, a configuration that many server chipsets require for stability at higher capacities. If the target system calls for single-rank, non-ECC, or unregistered memory, this part will not work.

Kohokohdat

  • ECC protection prevents data errors with registered DDR3 design
  • 1066 MHz speed handles server workloads at PC3-8500 bandwidth
  • 8 GB capacity in a single 240-pin module fits Dell part numbers
  • 2Rx4 rank organisation uses major-brand chips for reliable operation
  • 5 V standard voltage matches DDR3 platform requirements

Tekniset tiedot

BrandA-Tech
Capacity8GB
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL7
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Kysymyksiä tästä tuotteesta

Does the PC3-8500 rating limit real-world throughput on a registered DDR3 channel?

The PC3-8500 label indicates a 1066 MT/s data rate; actual throughput depends on the server's memory controller and channel configuration.

What physical slot and pin count does this 240-pin DDR3 RDIMM require?

It fits a standard 240-pin DDR3 DIMM socket keyed for registered modules; the notch position matches the DDR3 registered specification.

What is the correct installation sequence for this ECC RDIMM in a multi-socket server?

Populate the slot assigned to the target CPU channel first, align the notch, press straight down until both latches click, then verify the module is seated evenly before powering on.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.