Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 240-pin DDR3 DIMM with black chips and gold contacts

A-Tech

A-Tech 8GB DDR3 1066 ECC Registered Server RAM

SKU CH-3A6J-DJTVJ

8GB DDR3 1066MHz ECC registered server memory module with 4Rx8 organisation for compatible Kingston systems

  • Capacity8GB
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL3
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8GB capacity adds headroom for demanding server workloads
  • DDR3 1066 MHz speed matches PC3-8500 specification
  • ECC registered design detects and corrects data errors
  • 5V standard voltage ensures broad platform compatibility
  • 240-pin DIMM form factor fits compatible server slots

Server Memory Upgrade

This 8GB DDR3 1066 ECC Registered DIMM is built for servers and workstations that require registered memory with error correction. It runs at PC3-8500 speed with a CL3 latency at 1.50V standard voltage. The module uses a 4Rx8 organisation and major brand chipsets for stable operation in multi-slot configurations.

Kingston Compatible Replacement

The module replaces Kingston part numbers KVR1066D3Q8R7SK3/24G, KVR10R7Q8/8 and KVR10R7Q8K2/16 in compatible systems. The jump is worth it when your current memory capacity limits virtual machine density or database caching performance. It is not for systems that require unbuffered UDIMMs or non-ECC memory, or for platforms limited to lower rank counts per channel.

240-Pin DIMM Installation

Installation follows the standard 240-pin DDR3 DIMM procedure: align the notch, press firmly until the retention clips engage, and verify detection in BIOS or system management software. What usually goes wrong is mixing registered and unbuffered modules in the same channel, exceeding the platform's maximum rank limit per channel, or populating slots in an unsupported sequence for multi-channel operation.

Kohokohdat

  • 8GB capacity adds headroom for demanding server workloads
  • DDR3 1066 MHz speed matches PC3-8500 specification
  • ECC registered design detects and corrects data errors
  • 5V standard voltage ensures broad platform compatibility
  • 240-pin DIMM form factor fits compatible server slots

Tekniset tiedot

BrandA-Tech
SeriesCompatible Replacement for Kingston
ModelKVR1066D3Q8R7SK3/24G, KVR10R7Q8/8, KVR10R7Q8K2/16
Capacity8GB
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL3
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx8
ChipsetMajor Brand Chipset
FeaturesKVR1066D3Q8R7SK3/24G, KVR10R7Q8/8, KVR10R7Q8K2/16

Kysymyksiä tästä tuotteesta

Does this 240-pin DDR3 DIMM fit a standard server memory slot?

Yes, the module uses the 240-pin DDR3 DIMM form factor used by compatible server and workstation boards.

What is the correct way to seat this registered ECC module so the system recognises all 8 GB?

Align the notch with the slot key, press firmly until both retention clips click, and ensure the motherboard supports registered ECC DDR3 1066.

Will the 1.5 V DDR3 chips on this 4Rx8 module need replacement under normal server use?

The memory is a solid-state module with no moving parts and is not a wear item; it does not require scheduled replacement.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.