NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
8GB DDR3 1066MHz ECC registered server DIMM with CL7 latency and 1.5V operation
This 8GB DDR3 registered DIMM is built for servers and workstations that require ECC error correction. It replaces Samsung M392B1K70DM0-CF8, M393B1K70BH1-CF8, M393B1K70CH0-CF8 and M393B1K70DH0-CF8 modules. The 240-pin form factor fits standard DDR3 slots. Buyers needing unbuffered desktop memory or higher DDR generations cannot use this module.
The single 8GB module runs at 1066MHz with a PC3-8500 rating and CL7 latency. Registered buffering and 2Rx4 organisation allow the memory controller to address larger total capacities across multiple slots. Workloads that exceed the 8GB per module limit will require additional DIMMs to scale further.
Standard 1.5V DDR3 voltage keeps power draw within normal limits for registered server memory. Passive operation produces no fan noise and adds minimal heat to a chassis with adequate airflow. The module is tested for reliable continuous operation in typical server environments.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR3 1066 (PC3 8500) |
| CAS Latency | CL7 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Mixing modules of the same speed, voltage, and registered type is generally supported by server platforms, but the system will run all memory at the lowest common specifications.
Check the BIOS memory information screen or use a system utility such as CPU-Z to verify the reported speed of 1066MHz and that ECC status shows as enabled.
The package contains the single 8GB DDR3 1066MHz ECC RDIMM module only; no brackets, cables, or additional accessories are included.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?