Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

A-Tech

A-Tech 8GB DDR3 1333 Desktop RAM

SKU CH-YSSA-4GM9W

8GB DDR3 1333MHz desktop DIMM running at 1.5V for AMD and Intel systems

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • Tested Frequency1333
  • Voltage1.50V
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • 8GB capacity lets you run more applications at once
  • 1333 MHz DDR3 speed matches PC3-10600 system requirements
  • 50V standard voltage works with typical desktop motherboards
  • 240-pin DIMM form factor fits standard desktop memory slots
  • Non-ECC unbuffered design suits mainstream desktop platforms

8GB DDR3 1333 DIMM for desktop upgrades

This A-Tech module is an 8GB DDR3 1333MHz PC3-10600 DIMM built for desktop computers. It runs at the standard 1.50V and uses a 240-pin unbuffered non-ECC design. The kit contains a single 8GB stick tested at 1333MHz for reliable operation.

Suits owners of DDR3 desktops needing one 8GB stick

It fits systems that accept DDR3 1333MHz unbuffered non-ECC DIMMs at 1.5V. It is not for machines that require ECC or registered memory, nor for boards limited to lower densities per slot. Buyers needing multiple modules to reach a target capacity should verify slot count first.

Single 8GB module at DDR3 1333MHz 1.5V

The decisive specification is the single 8GB density on one 240-pin DIMM running at DDR3 1333MHz PC3-10600 1.5V unbuffered non-ECC. Confirm your motherboard supports this exact density, speed, voltage and pin count before ordering.

Kohokohdat

  • 8GB capacity lets you run more applications at once
  • 1333 MHz DDR3 speed matches PC3-10600 system requirements
  • 50V standard voltage works with typical desktop motherboards
  • 240-pin DIMM form factor fits standard desktop memory slots
  • Non-ECC unbuffered design suits mainstream desktop platforms

Tekniset tiedot

BrandA-Tech
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
Tested Frequency1333
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
Recommend UseAMD & Intel Compatible

Kysymyksiä tästä tuotteesta

Does my motherboard need a 240-pin DDR3 slot for this module?

Yes, the module is a 240-pin DDR3 DIMM that fits standard desktop DDR3 slots.

Can I run this 1.5 V stick with older 1.5 V DDR3 modules in the same system?

Both operate at 1.5 V, so they can share a channel if the motherboard supports matching speed and timing.

How do I confirm the RAM is running at 1333 MHz after installation?

Check the memory frequency in BIOS or a system utility such as CPU-Z; it should report 1333 MHz (PC3-10600).

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.