Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green rectangular 240-pin DDR3 RDIMM module with black memory chips and gold edge connectors

A-Tech

A-Tech 8GB DDR3 1333MHz ECC RDIMM 2Rx4 Server RAM

SKU CH-TRCH-CY90W

8GB DDR3 1333MHz ECC registered DIMM with Samsung chipset for server memory upgrades

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection prevents data errors with registered DDR3 design
  • 1333 MHz speed and CL9 latency deliver responsive server performance
  • 5 V standard voltage ensures broad DDR3 platform compatibility
  • 2Rx4 rank configuration optimises memory density for 8 GB capacity
  • Tested replacement for Samsung M392B1K70BM1-CH9, M392B1K70CM0-CH9, M392B1K70DM0-CH9

8GB DDR3 1333MHz ECC RDIMM

This A-Tech module delivers 8GB of DDR3 registered ECC memory at 1333MHz with CL9 latency. It operates at the standard 1.50V DDR3 voltage and uses a 2Rx4 rank configuration built on Samsung chipset. The 240-pin DIMM form factor targets servers and workstations requiring error-correcting registered memory for data integrity.

Sustained load behaviour

Registered ECC architecture adds a clock cycle of buffering to stabilise the command bus under continuous multi-threaded workloads. Error correction detects and corrects single-bit errors on the fly, preventing silent data corruption during long compute runs. The 1.50V operating voltage keeps power draw predictable when all slots are populated in a dense chassis.

Upgrade context

This module replaces Samsung M392B1K70BM1-CH9, M392B1K70CM0-CH9 or M392B1K70DM0-CH9 sticks in compatible platforms. The jump is worthwhile when expanding capacity within an existing DDR3 registered memory subsystem or swapping failed modules. It does not suit systems that require unbuffered non-ECC DIMMs or a different DDR generation.

Kohokohdat

  • ECC protection prevents data errors with registered DDR3 design
  • 1333 MHz speed and CL9 latency deliver responsive server performance
  • 5 V standard voltage ensures broad DDR3 platform compatibility
  • 2Rx4 rank configuration optimises memory density for 8 GB capacity
  • Tested replacement for Samsung M392B1K70BM1-CH9, M392B1K70CM0-CH9, M392B1K70DM0-CH9

Tekniset tiedot

BrandA-Tech
SeriesCompatible Replacement for Samsung
ModelM392B1K70BM1-CH9, M392B1K70CM0-CH9, M392B1K70DM0-CH9
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetSamsung Chipset
FeaturesM392B1K70BM1-CH9, M392B1K70CM0-CH9, M392B1K70DM0-CH9

Kysymyksiä tästä tuotteesta

How much power does this 1.5 V DDR3 RDIMM draw when the server runs continuously?

It operates at the standard 1.5 V DDR3 voltage; registered modules add only a small buffer current over unbuffered DIMMs.

What motherboard slot and memory controller features are required for this module to work?

A 240-pin DDR3 DIMM slot that supports registered ECC memory is required.

Can I mix this 2Rx4 registered ECC stick with older unbuffered non-ECC DDR3 DIMMs?

No, registered and unbuffered DIMMs cannot be mixed, and ECC requires a compatible memory controller.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.