Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 240-pin DDR3 DIMM with black chips and silver label

A-Tech

A-Tech 8GB DDR3 1600 ECC RDIMM 2Rx4 Server RAM

SKU CH-VZ0N-P181W

8GB DDR3 1600 ECC registered DIMM with CL11 latency and 1.5V operation for server memory upgrades

  • Capacity8GB
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection prevents data errors with registered DDR3 architecture
  • 1600 MHz speed handles demanding server workloads efficiently
  • 50 V standard voltage ensures broad platform compatibility
  • 240-pin DIMM form factor fits standard server memory slots
  • 2Rx4 dual-rank organisation maximises memory density per module

8 GB DDR3 ECC RDIMM for servers

This 8 GB registered DIMM runs at DDR3 1600 with CL11 latency and 1.5 V standard voltage. It targets administrators upgrading or repairing DDR3-era servers and workstations that require ECC registered memory. The single-module format suits slot-limited boards or incremental capacity increases.

240-pin registered design with major-brand chips

The 240-pin DIMM uses a registered buffer to reduce electrical load on the memory controller, a requirement for many multi-socket platforms. Major-brand DRAM chips are specified, and each module undergoes quality-assurance testing before shipment. The 2Rx4 organisation fits systems expecting dual-rank x4 devices.

Direct replacement for three Hynix part numbers

This module matches Hynix HMT31GR7BFR4C-PB, HMT31GR7CFR4C-PB and HMT31GR7EFR4C-PB, simplifying sourcing when those original parts are unavailable. No additional accessories or software are bundled; the value lies in verified compatibility and the supplier's lifetime warranty with US-based technical support.

Kohokohdat

  • ECC protection prevents data errors with registered DDR3 architecture
  • 1600 MHz speed handles demanding server workloads efficiently
  • 50 V standard voltage ensures broad platform compatibility
  • 240-pin DIMM form factor fits standard server memory slots
  • 2Rx4 dual-rank organisation maximises memory density per module

Tekniset tiedot

BrandA-Tech
Capacity8GB
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Kysymyksiä tästä tuotteesta

What speed does the DDR3 1600 interface cap at in practice?

The module runs at DDR3 1600 MHz, rated PC3-12800, with CL11 latency and 1.50 V standard voltage.

What physical slot and dimensions does the 240-pin DIMM need to fit?

It uses a standard 240-pin DDR3 DIMM form factor, keyed for registered server boards that accept RDIMM modules.

How is the registered ECC RDIMM installed, and what step do people often miss?

Align the notch with the slot key, press firmly until both retention clips click, and verify the system detects ECC registered mode in BIOS.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.