Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 240-pin DDR3 DIMM with black chips and silver heat spreader

A-Tech

A-Tech 8GB DDR3 1600 ECC RDIMM 2Rx8 Server Memory Micron MT18JDF1G72PDZ-1G6 MT18JSF1G72PDZ-1G6E1

SKU CH-K8SS-718FP

Adds 8 GB of registered ECC DDR3 1600 memory to compatible servers with a 240-pin DIMM slot

  • Capacity8GB
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection prevents data corruption in critical workloads
  • Registered design improves signal integrity for stable server operation
  • 8 GB capacity expands memory headroom for virtualisation and databases
  • DDR3 1600 speed delivers 12800 MB/s bandwidth for responsive performance
  • 240-pin DIMM form factor fits standard server memory slots

8GB DDR3 1600 ECC RDIMM Server Upgrade

This 8GB DDR3 1600MHz PC3-12800 ECC Registered DIMM targets server and workstation administrators who need to expand memory capacity on platforms that require registered modules. The module operates at standard 1.5V with CL11 latency and uses a 2Rx8 organisation built with major-brand chips.

Replaces Micron MT18JDF1G72PDZ-1G6

It serves as a direct equivalent for the listed Micron part numbers, allowing a like-for-like swap when a slot fails or when additional capacity is required. The upgrade is worthwhile when the system supports DDR3 1600 registered ECC memory and the workload benefits from extra buffer space for virtualization or database tasks.

240-pin DIMM installs in standard registered slots

Installation follows the usual DIMM procedure: align the notch, press firmly until the retention clips engage, then verify detection in BIOS. The most common issue is mixing registered and unbuffered modules or exceeding the platform's maximum supported rank count per channel, which prevents the system from posting.

Kohokohdat

  • ECC protection prevents data corruption in critical workloads
  • Registered design improves signal integrity for stable server operation
  • 8 GB capacity expands memory headroom for virtualisation and databases
  • DDR3 1600 speed delivers 12800 MB/s bandwidth for responsive performance
  • 240-pin DIMM form factor fits standard server memory slots

Tekniset tiedot

BrandA-Tech
Capacity8GB
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Kysymyksiä tästä tuotteesta

Does this 240-pin DDR3 DIMM fit a standard server memory slot?

Yes, the module uses the 240-pin DDR3 DIMM form factor that matches standard registered DIMM slots in compatible servers and workstations.

What is the correct way to seat this registered ECC module, and what step is often missed?

Align the notch with the slot key, press firmly until both side clips click, and verify the system recognises the full 8 GB capacity at 1600 MHz.

Will the ECC error-correction or registered buffer degrade and need replacement over time?

The ECC and registered functions are built into the DRAM and register chips; they do not wear out, so no periodic replacement is required.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.