Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 240-pin DDR3 DIMM module with black memory chips and silver edge contacts

A-Tech

A-Tech 8GB DDR3 1600 ECC UDIMM 2Rx8 1.5V server RAM

SKU CH-AJT6-1G2M6

8GB DDR3 1600 ECC UDIMM 2Rx8 server RAM with 1.5V CL11 for Hynix compatibility

  • Capacity8GB
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ECC protection guards data integrity with built-in error correction
  • 1600 MHz DDR3 speed delivers responsive server performance
  • 2Rx8 dual-rank layout increases memory density per slot
  • 50 V standard voltage ensures broad platform compatibility
  • 240-pin UDIMM form factor fits compatible server motherboards

8GB DDR3 ECC UDIMM for servers

This 8GB DDR3 1600 ECC UDIMM module provides error-correcting memory for server and workstation platforms. It runs at 1.5V with CL11 latency and uses a 2Rx8 organisation on a 240-pin DIMM. The stick is designed as a direct replacement for the listed Hynix part numbers.

Check DDR3 ECC UDIMM support and slot count

Verify that your motherboard accepts DDR3 ECC unbuffered DIMMs at 1600 MHz and 1.5V. Confirm the maximum capacity per slot and the total number of available 240-pin slots. Matching the 2Rx8 rank structure avoids potential population limits on some platforms.

Adds 8GB of ECC capacity to a DDR3 system

The module installs in a standard 240-pin DDR3 slot and requires a platform that supports ECC UDIMM operation. It expands memory for virtualization, file serving or compute workloads without needing registered DIMM infrastructure. No additional cooling or power connectors are required.

Kohokohdat

  • ECC protection guards data integrity with built-in error correction
  • 1600 MHz DDR3 speed delivers responsive server performance
  • 2Rx8 dual-rank layout increases memory density per slot
  • 50 V standard voltage ensures broad platform compatibility
  • 240-pin UDIMM form factor fits compatible server motherboards

Tekniset tiedot

BrandA-Tech
Capacity8GB
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Kysymyksiä tästä tuotteesta

What comes in the box and do I need any extra parts to install this 8GB DDR3 1600 ECC UDIMM module?

The box contains one 8GB DDR3 1600 ECC UDIMM module with 240 pins. No additional components are required for installation in a compatible server or workstation motherboard slot.

Which version should I choose if my system requires a Hynix HMT41GU7MFR8C-PB replacement?

This module is a compatible equivalent for Hynix HMT41GU7MFR8C-PB and the other listed Hynix part numbers, matching the 8GB capacity, DDR3 1600 speed, ECC UDIMM type, 2Rx8 rank and 1.5V voltage.

What does the PC3-12800 rating mean for real-world server performance with this CL11 1.5V module?

PC3-12800 indicates a peak transfer rate of 12800 MB/s at 1600 MHz. The CL11 latency and standard 1.5V voltage deliver stable ECC error correction for reliable server workloads.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.