Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 240-pin DDR3 DIMM with black memory chips

A-Tech

A-Tech 8GB DDR3 1600 ECC UDIMM 2Rx8 Server RAM Micron MT18JSF1G72AZ-1G6E1

SKU CH-RXXC-TE67M

8GB DDR3 1600 ECC unbuffered DIMM with 2Rx8 organisation and 1.5V operation for server memory upgrades

  • Capacity8GB
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ECC protection guards data integrity with built-in error correction
  • 1600 MHz DDR3 speed supports responsive server workloads
  • 2Rx8 dual-rank layout increases memory density per slot
  • 5 V standard voltage matches DDR3 platform requirements
  • 240-pin UDIMM form factor fits compatible server motherboards

Capacity and Module Format

This A-Tech 8GB DDR3 1600 ECC UDIMM module provides a single 8GB stick built to the 240-pin DIMM standard. It runs at 1600 MHz with a CL11 latency and 1.50V voltage, using Micron chips in a 2Rx8 organisation. The unbuffered ECC design suits servers and workstations that require error correction without registered buffering.

Systems that accept unbuffered ECC

This memory fits servers and workstations that support DDR3 ECC UDIMM modules at 1600 MHz. It will not work in platforms that require registered or load-reduced DIMMs, nor in consumer boards that lack ECC support in the chipset and BIOS. Buyers needing higher density per slot or registered signalling must select a different module type.

The 2Rx8 ECC UDIMM specification decides fit

The combination of unbuffered operation, ECC functionality, and dual-rank 2Rx8 organisation determines whether this part is compatible with a given motherboard. Verify that the system documentation explicitly lists DDR3 1600 ECC UDIMM support with 2Rx8 population rules before purchase.

Kohokohdat

  • ECC protection guards data integrity with built-in error correction
  • 1600 MHz DDR3 speed supports responsive server workloads
  • 2Rx8 dual-rank layout increases memory density per slot
  • 5 V standard voltage matches DDR3 platform requirements
  • 240-pin UDIMM form factor fits compatible server motherboards

Tekniset tiedot

BrandA-Tech
Capacity8GB
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Kysymyksiä tästä tuotteesta

Should I choose the 2Rx8 version or a single-rank alternative for my server?

The module is built as 2Rx8, meaning it has two ranks of x8 chips; this density is what the Micron MT18JSF1G72AZ-1G6E1 specifies, so select this version when your system requires that exact rank configuration.

What does the DDR3 1600 (PC3-12800) rating deliver in an actual server?

It runs at 1600 MT/s with CL11 latency at 1.50 V, providing the standard DDR3-1600 data rate for compatible platforms.

Is the 240-pin UDIMM interface compatible with registered DIMM slots?

No, the module is an unbuffered ECC UDIMM on a 240-pin DDR3 form factor and will only fit motherboards that accept UDIMMs, not registered DIMM slots.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.